Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D6237-03
Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
Automaticky přeložený název:
Standardní Guide Pro malování inspektorů ( betonových a zděných substráty )
NORMA vydána dne 10.7.2003
Informace o normě:
Označení normy: ASTM D6237-03
Poznámka: NEPLATNÁ
Datum vydání normy: 10.7.2003
Kód zboží: NS-34336
Počet stran: 12
Přibližná hmotnost: 36 g (0.08 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM D6237-03 :
Keywords:
abrasive blasting, acid treatment (concrete), adhesion, chemical cleaning, coatings, concrete, detergents, inspection, laitance, masonry, moisture, ICS Number Code 87.020 (Paint coating processes), 91.060.10 (Walls. Partitions. Facades)
Doplňující informace
| Significance and Use | ||||||||||||||||||||||||||||||||||||||||||||
|
This guide is intended as a reference for those concerned with the inspection of thin- or thick-film coating application to concrete and masonry substrates. It does not cover the application of cement-type coatings. A checklist is included as Appendix X1.1. Many of the details covered may be in a specification for a particular project. A specification for coating projects should include the coatings to be used. |
||||||||||||||||||||||||||||||||||||||||||||
| 1. Scope | ||||||||||||||||||||||||||||||||||||||||||||
|
1.1 This guide is intended as an information aid to painting inspectors in carrying out the task efficiently. It includes the key elements of surface preparation, coatings application, and final approval for both field and shop work. The items should be selected that are pertinent to a particular job. Note 1—For additional helpful information, refer to the following documents: Manual of Concrete Practice ACI 515R American Concrete Institute Manual of Coating Work for Light Water Nuclear Power Plant Primary Containment and Other Safety Related Facilities C 811 Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings SSPC-PA Guide 3 - A Guide to Safety in Paint Application Steel Structures Painting Manual Vol. 1- Good Painting Practices Steel Structures Painting Manual Vol. 2 - Systems and Specifications Manufacturers Specifications and Instructions (made available to the inspector for reference to special requirements for proper application) Material Safety Data Sheets (needed to insure that personnel take necessary precautions in handling hazardous materials) Available from Materials manufacturer. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whomever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||||||||
|
Doporučujeme:
