Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM D6179-07(2014) 1.4.2014 náhled

Doplňující informace

ASTM D6179-07(2014)

Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates

Automaticky přeložený název:

Standardní zkušební metody pro Hrubá manipulaci s břemeny, unifikovaný a Velké Přepravní kufry a bedny

NORMA vydána dne 1.4.2014

Jazyk
Provedení	PDF - okamžité stažení - 1 985.50 Kč Tištěné - 1 985.50 Kč
Dostupnost	SKLADEM
Cena	1985.50 Kč bez DPH
1 985.50 Kč

Informace o normě:

Označení normy: ASTM D6179-07(2014)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.4.2014
Kód zboží: NS-34114
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Ostatní normy týkající se nákladní dopravy zboží

Anotace textu normy ASTM D6179-07(2014) :

Keywords:

drop, large shipping cases and crates, rolling, tip, tipover, unitized loads, ICS Number Code 55.180.99 (Other standards related to freight distribution of goods)

Doplňující informace

Significance and Use

4.1 These test methods will allow the user to determine integrity and stability of the load as well as provide guidance to improve the design of the shipping container or the unit load where deficiencies are found.

4.2 Damage to products or packages observed during testing can be expected to correlate at least in a qualitative way to damage observed in actual distribution handling systems.

4.3 The results received from shock machine testing and free fall drop testing are different for certain products. Where this test is performed to satisfy a regulatory or contractual requirement, its use is subject to approval by the agency concerned.

1. Scope

1.1 These test methods cover testing the integrity of unitized loads and large shipping cases and crates as well as the ability of the contents to endure rough handling. Not all of the test methods are applicable to all products, containers, and loads. These test methods are applicable to common means of material handling as follows:

1.1.1 Test Method A, B, C, D, and E—Drop Test—For measuring the ability of the case or crate or unitized load to withstand rough handling impacts and provide information useful in improving the design of the container. Normally, Test Methods A and B are not applied to unitized loads.

1.1.2 Test Method F—Tip Test—For determining if filled tall or top heavy cases, crates, or unitized loads will tip over when tilted to a predetermined angle.

1.1.3 Method G—Tipover Test—For determining the ability of filled large shipping cases or crates to resist the impacts associated with tipover hazards, and for determining the ability of the packaging and packing methods to provide protection to the contents, when the case or crate is tipped over.

1.1.4 Test Method H—Rolling Test—For determining the ability of complete, filled large shipping cases or crates to withstand the effects of rolling.

1.2 Additional Test Procedures :

1.2.1 Test methods for mechanical handling of unitized loads and large shipping cases and crates are set forth in Test Method D6055. Additional tests that apply to mechanical handling of unitized loads and large cases and crates include incline impact tests, described in Test Method D880 and horizontal impact tests, described in Test Methods D4003 and Test Method D5277. Test Methods D4003 includes a special pallet marshaling test and Test Methods D1185 provides test methods for pallets and related structures.

1.2.2 Practice D4169 provides a series of options for selecting and running performance tests on all types of shipping containers and systems.

1.3 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

D5276-19(2023)	Standard Test Method for Drop Test of Loaded Containers by Free Fall
D5277-22	Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
D5487-16(2022)	Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines
D6055-96(2019)	Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
ISO 2876	Packaging--Complete, Filled Transport Packages--Rolling Test Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036, http://www.ansi.org.
ISO 8768	Packaging--Complete, Filled Transport Packages--Toppling Test
D880-92(2021)	Standard Test Method for Impact Testing for Shipping Containers and Systems
D996-23	Standard Terminology of Packaging and Distribution Environments
D1185-98a(2017)	Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping (Includes all amendments and changes 7/6/2017).
D4003-98(2019)e1	Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems (Includes all amendments and changes 8/14/2019).
D4169-23	Standard Practice for Performance Testing of Shipping Containers and Systems
D4332-22	Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing

Podobné normy:

ASTM D6055-96(2014)..

Historická
1.4.2014

ASTM D6253-10

Historická
1.1.2010

ASTM D6653/D6653M-13..

Historická
15.1.2013

ASTM D6911-03(2010)..

Historická
1.7.2010

ASTM D7387-13

Historická
1.2.2013

ASTM E2462-10

Historická
1.11.2010

Doporučujeme:

Aktualizace technických norem

Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.

Chcete vědět více informací? Podívejte se na tuto stránku.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.