ASTM D6253-10
ASTM D6653/D6653M-13..
ASTM D6911-03(2010)..
ASTM D7387-13
ASTM E2462-10
ASTM E2463-11
Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D6055-96(2014)
Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
Automaticky přeložený název:
Standardní zkušební metody pro mechanickou manipulaci s břemeny unifikovaný a Velké Přepravní kufry a bedny
NORMA vydána dne 1.4.2014
Informace o normě:
Označení normy: ASTM D6055-96(2014)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.4.2014
Kód zboží: NS-33584
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Ostatní normy týkající se nákladní dopravy zboží
Bedny. Krabice. Laťovky
Anotace textu normy ASTM D6055-96(2014) :
Keywords:
clamp handling, crates, fork truck handling, grabhook, large shipping cases, mechanical handling, push-pull handling, sling, spade lift, unitized loads, ICS Number Code 55.160 (Cases. Boxes. Crates), 55.180.99 (Other standards related to freight distribution of goods)
Doplňující informace
| Significance and Use | ||||||||||
|
4.1 These test methods are designed for use in most cases with the actual equipment to be used in load handling. 4.2 These test methods may be used in evaluating the shipping unit as to suitability for mechanical handling by standard user-specified load-handling equipment. 4.3 These test methods will allow the user to determine integrity and stability of the load as well as provide guidance to improve the design of the unit load where deficiencies are found. 4.4 Damage to products or packages observed during testing may be expected to correlate at least in a qualitative way to damage observed in actual distribution handling systems. |
||||||||||
| 1. Scope | ||||||||||
|
1.1 These test methods are suitable for testing the integrity of unitized loads and large cases and crates, but not individual drums or palletized drums, as well as the ability of the contents to endure normal handling, using standard mechanical handling equipment. Not all of the test methods are applicable to all products containers and loads. These test methods are applicable to common means of material handling, including pull pack, clamp truck, and spade lift-type handling equipment as follows: 1.1.1 Test Method A——1.1.2 Test Method B—1.1.3 Test Method C—1.1.4 Test Method D—1.1.5 Test Method E—1.1.6 Test Method F—1.2 Additional Test Methods: 1.2.1 Additional test methods that apply to mechanical handling and rough handling tests of unitized loads and large cases and crates include incline impact tests, described in Test Method D880; horizontal impact tests, described in Test Method D4003. 1.2.2 Practice D4169 provides a series of options for selecting and running performance tests on all types of shipping containers and systems. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||
| 2. Referenced Documents | ||||||||||
|
Podobné normy:
Historická
1.1.2010
Historická
15.1.2013
Historická
1.7.2010
Historická
1.2.2013
Historická
1.11.2010
Historická
1.9.2011
Odebírejte informace o nově vydaných normách ZDARMA:
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
