Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Creating Surface Appearance Changes in Pile Yarn Floor Covering from Foot Traffic
Automaticky přeložený název:
Standardní praktiky pro tvorbu Surface vzhled se mění v hromadu příze podlahová krytina z pěšímu provozu
NORMA vydána dne 1.2.2012
Označení normy: ASTM D6119-12
Poznámka: NEPLATNÁ
Datum vydání normy: 1.2.2012
Kód zboží: NS-33859
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
appearance, carpet, foot traffic units, textile floor covering , Yarns, Appearance of textile materials/applications, Carpets, Foot traffic, Pile yarn floor coverings, Surface analysis--textile fabrics/fibers, Textile floor covering materials, ICS Number Code 97.150 (Floor coverings)
Significance and Use | ||||||||
By exposure to sufficient traffic, this practice can be applied to any pile yarn floor covering which undergoes changes in surface appearance. This practice does not simulate surface appearance changes due to soiling, pivoting, or rolling traffic, or traffic on stairs. |
||||||||
1. Scope | ||||||||
1.1 This practice covers the trafficking of pile yarn floor coverings in a laboratory in order to effect a change in surface appearance as a result of exposure to foot traffic under controlled conditions. A separate test method covers the assessment of surface appearance change using the CRI Reference Scales. 1.2 This practice is applicable to most changes in surface appearance observed in all types of carpet that are intended for residential or commercial use. It eliminates change in appearance associated with soiling by focusing on appearance change due to matting, flattening, or change in pile fiber configuration. Although “pile reversal” or “watermarking” is occasionally visible, this practice is not a reliable method for producing this phenomenon. 1.3 This practice may be used by mutual agreement between the purchaser and supplier to set purchasing specifications. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 7. |
||||||||
2. Referenced Documents | ||||||||
|
Historická
1.7.2012
Historická
1.10.2011
Historická
15.4.2013
Historická
1.7.2012
Historická
1.3.2009
Historická
15.9.2011
Poslední aktualizace: 04.11.2024 (Počet položek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.