Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering
Automaticky přeložený název:
Standardní zkušební metoda pro odolnost proti delaminaci Střední podporou Pile příze podlahová krytina
NORMA vydána dne 1.7.2012
Označení normy: ASTM D3936-12
Poznámka: NEPLATNÁ
Datum vydání normy: 1.7.2012
Kód zboží: NS-25395
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
carpet, peel, pile yarn floor covering, strength delamination, textile floor covering, ICS Number Code 97.150 (Floor coverings)
Significance and Use | ||||||||||||
This test method is used for acceptance testing of commercial shipments. Comparative tests as directed in 5.2 may be advisable. In a case of a dispute arising from differences in reported test results when using this test method, the purchaser and the supplier should conduct comparative tests to determine if there is a statistical bias between their laboratories. Competent statistical assistance is recommended for the investigation of bias. As a minimum, the two parties should take a group of test samples that are as homogenous as possible and are from a lot of material of the type in question. The test samples then should be assigned randomly in equal numbers to each laboratory for testing. The average results from the two laboratories should be compared using a statistical test for unpaired data and an acceptable probability level chosen by the two parties before testing is begun. If a bias is found, either its cause must be found and corrected or the purchaser and the supplier must agree to interpret future test results with consideration to the known bias. This test method is useful to evaluate quality and cost control during the manufacture of pile yarn floor covering. Both appearance and performance of the pile floor covering can be affected by delamination of the secondary backing. |
||||||||||||
1. Scope | ||||||||||||
1.1 This test method covers the measurement of the resistance to delamination of the secondary backing applied to some pile yarn floor coverings. 1.2 This test method is applicable to all backings including natural manufactured fibers or attached cushion. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||
2. Referenced Documents | ||||||||||||
|
Historická
1.7.2011
Historická
15.10.2012
Historická
1.9.2009
Historická
1.12.2013
Historická
1.3.2012
Historická
15.5.2013
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.