Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D5893/D5893M-16
Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
Přeložit název
NORMA vydána dne 1.7.2016
Informace o normě:
Označení normy: ASTM D5893/D5893M-16
Poznámka: NEPLATNÁ
Datum vydání normy: 1.7.2016
Kód zboží: NS-643353
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM D5893/D5893M-16 :
Keywords:
chemically curing sealant, joint sealant, portland cement concrete pavement, silicone sealant,, ICS Number Code 93.080.20 (Road construction materials)
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||||
|
1.1 This specification covers cold applied, single component, chemically curing silicone sealants that are based on polymers of polysiloxane structures and are intended for use in sealing joints and cracks in portland cement concrete highway and airfield pavements. The specification includes both non-sag and self-leveling types of sealants. 1.1.1 This specification does not purport to cover the properties required of sealants for use in areas of portland cement concrete pavements subject to jet fuel or other fuel spillage, such as vehicle or aircraft refueling and maintenance areas, or a combination thereof. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 The following safety hazards caveat pertains
only to the test methods portion, Section 9, of this specification:
Standard Terminology Relating to
Formed-in-Place Sealants for Joints and Cracks in Pavements Standard Test Methods for Sealants and
Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements
and Portland Cement Concrete Pavements Standard Practice for Preparing Concrete
Blocks for Testing Sealants, for Joints and Cracks Standard Test Method for Slump of
Sealants Standard Specification for Backer
Material for Use with Cold- and Hot-Applied Joint Sealants in
Portland Cement Concrete and Asphalt Joints Standard Test Methods for Vulcanized
Rubber and Thermoplastic Elastomers—Tension Standard Test Method for Indentation
Hardness of Elastomeric-Type Sealants by Means of a Durometer Standard Test Method for Tack-Free Time
of Elastomeric Sealants Standard Test Method for Effects of Heat
Aging on Weight Loss, Cracking, and Chalking of Elastomeric
Sealants Standard Test Method for Effects of
Laboratory Accelerated Weathering on Elastomeric Joint Sealants Standard Test Method for Rheological
(Flow) Properties of Elastomeric Sealants Standard Test Method for Extrusion Rate
of Elastomeric Sealants Standard Practice for Conditioning
Plastics for Testing |
Doporučujeme:
