Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus
Automaticky přeložený název:
Standardní zkušební metoda pro univerzální oxidační zkoušky pro hydraulické a turbínových olejů Použití Universal Oxidační zkušebního zařízení
NORMA vydána dne 1.12.2012
Označení normy: ASTM D5846-07(2012)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.12.2012
Kód zboží: NS-32767
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
hydraulic fluids, oxidation stability, turbine oils, universal oxidation test, ICS Number Code 75.080 (Petroleum products in general), 75.120 (Hydraulic fluids)
Significance and Use | ||||||||||||||||||||||||||
5.1 Degradation of hydraulic fluids and turbine oils, because of oxidation or thermal breakdown, can result in the formation of acids or insoluble solids and render the oil unfit for further use. 5.2 This test method can be used to estimate the relative oxidation stability of petroleum-base oils. It should be recognized that correlation between results of this test and the oxidation stability in use can vary markedly with service conditions and with various oils. |
||||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||||
1.1 This test method covers a procedure for evaluating the oxidation stability of petroleum base hydraulic oils and oils for steam and gas turbines. 1.2 This test method was developed to evaluate the oxidation stability of petroleum base hydraulic oils and oils for steam and gas turbines. 1.2.1 Rust and oxidation inhibited hydraulic, anti-wear hydraulic and turbine oils of ISO 32–68 viscosity were used to develop the precision statement. This test method has been used to evaluate the oxidation stability of fluids made with synthetic basestock and in-service oils; however, these fluids have not been used in cooperative testing to develop precision data. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.4 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
BS 1829 Specification for Carbon Steel Wire;
alternate to Specification Reference Spot Sheet Available from ASTM
International Headquarters. Order Adjunct No. . Original adjunct
produced in 2000. Standard Specification for Hard-Drawn
Copper Wire IP 2546 Practice for Sampling of Petroleum
Products; alternate to Practice Standard Test Method for Semiquantitative
Micro Determination of Acid Number of Lubricating Oils During
Oxidation Testing Standard Guide for Universal
Oxidation/Thermal Stability Test Apparatus Standard Test Method for Cleanliness and
Compatibility of Residual Fuels by Spot Test Standard Practice for Manual Sampling of
Petroleum and Petroleum Products Standard Test Method for Acid Number of
Petroleum Products by Semi-Micro Color Indicator Titration Standard Specification for General
Requirements for Wire Rods and Coarse Round Wire, Carbon Steel Standard Test Method for Acid Number of
Petroleum Products by Potentiometric Titration (Includes all
amendments and changes 1/4/2019). Standard Test Method for Oxidation
Characteristics of Inhibited Mineral Oils Standard Test Method for Acid and Base
Number by Color-Indicator Titration |
Historická
15.4.2012
Historická
1.5.2010
Historická
15.4.2012
Historická
1.5.2010
Historická
15.2.2010
Historická
1.10.2011
Poslední aktualizace: 04.11.2024 (Počet položek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.