Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography
Automaticky přeložený název:
Standardní zkušební metoda pro separaci zástupce aromátů a Nonaromatics frakcí s vysokou teplotou varu oleje vymýváním chromatografií
NORMA vydána dne 15.4.2012
Označení normy: ASTM D2549-02(2012)
Poznámka: NEPLATNÁ
Datum vydání normy: 15.4.2012
Kód zboží: NS-20701
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
aromatics fraction, elution chromatography, high-boiling oils, nonaromatics fraction, Aromatic compounds, Hydrocarbons, Liquid chromatography (LC), Nonaromatic hydrocarbons, Petroleum fractions, Petroleum oils, Sampling petroleum products, ICS Number Code 75.080 (Petroleum products in general)
Significance and Use | ||||||||||
The determination of compound types by mass spectrometry requires, in some instances, a preliminary separation of the petroleum sample into representative aromatics and nonaromatics fractions, as in Test Methods D2425, D2786, and D3239. This test method provides a suitable separation technique for this application. |
||||||||||
1. Scope | ||||||||||
1.1 This test method covers the separation and determination of representative aromatics and nonaromatics fractions from hydrocarbon mixtures that boil between 232 and 538°C (450 and 1000°F). Alternative procedures are provided for the separation of 2 g or 10 g of hydrocarbon mixture. Note 1—Some components may not be eluted from the chromatographic column for some types of samples under the conditions used in this method. Note 2—Test Method D2007 is an alternative method of separating high-boiling oils into polar compounds, aromatics, and saturates fractions. 1.2 An alternative procedure is provided to handle samples boiling below 232°C (450°F), but whose 5 % point is above 178°C (350°F) as determined by Test Method D2887. This procedure is given in Appendix X1. 1.3 The values stated in acceptable SI units are to be regarded as the standard. The values given in parentheses are provided for information purposes only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and heal practices and determine the applicability of regulatory limitations prior to use. |
||||||||||
2. Referenced Documents | ||||||||||
|
Historická
1.6.2014
Historická
15.7.2007
Historická
1.11.2012
Historická
1.12.2012
Historická
1.10.2010
Historická
1.12.2012
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.