Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Norma ASTM D5498-12a(2018) 1.8.2018 náhled

Doplňující informace

ASTM D5498-12a(2018)

Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities (Includes all amendments and changes 8/13/2018).

Přeložit název

NORMA vydána dne 1.8.2018

Jazyk
Provedení	PDF - okamžité stažení - 1 413.90 Kč Tištěné - 1 413.90 Kč
Dostupnost	SKLADEM
Cena	1 413.90 Kč bez DPH
1 413.90 Kč

Informace o normě:

Označení normy: ASTM D5498-12a(2018)
Datum vydání normy: 1.8.2018
Kód zboží: NS-856554
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Jaderné elektrárny, bezpečnost

Anotace textu normy ASTM D5498-12a(2018) :

Keywords:

coating and linings work inspection, inspection, inspection training, nuclear, qualification and certification, training program,, ICS Number Code 27.120.20 (Nuclear power plants. Safety)

Doplňující informace

Significance and Use

4.1 Personnel trained for coating and lining work inspection are required to perform examination/inspection tasks to verify conformance of coating and lining work to written requirements.

4.2 This guide provides guidance for development of an indoctrination and training program for training of personnel performing coating and lining work inspection.

4.3 Certification/qualification of personnel performing coating and lining work inspection is addressed in Guide D4537.

1. Scope

1.1 This guide is intended to assist those responsible for developing a program for the indoctrination and training of personnel performing coating and lining inspection work for nuclear facilities.

1.2 It is recognized that organizations and job responsibilities vary widely among utilities and also among various support and service companies. It is the responsibility of the user of this guide to identify the appropriate subject matter for its program and its specific needs.

1.3 Users of this guide must ensure that coating and lining work complies not only with this guide, but also with the licensee's plant-specific quality assurance program and licensing commitments.

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

D1005-95(2020)	Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
D2240-15(2021)	Standard Test Method for Rubber Property—Durometer Hardness
D6132-13(2022)	Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
D6237-19	Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
D7167-12(2018)	Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant
D4538-21	Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
D4541-22	Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
D4610-98(2021)	Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings
D4752-20	Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
D4417-21	Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
D4259-18	Standard Practice for Preparation of Concrete by Abrasion Prior to Coating Application
D4260-23	Standard Practice for Liquid and Gelled Acid Etching of Concrete
D4263-83(2018)	Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
D4285-83(2018)	Standard Test Method for Indicating Oil or Water in Compressed Air
D3359-23	Standard Test Methods for Rating Adhesion by Tape Test
D3843-16(2021)e1	Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities (Includes all amendments and changes 2/22/2021).
D3925-02(2022)	Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
D4258-23	Standard Practice for Surface Cleaning Concrete for Coating
D5144-08(2021)	Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants
D5162-21	Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
D5163-16(2021)	Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants
D5402-19	Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
D6386-22	Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
D6677-18(2022)	Standard Test Method for Evaluating Adhesion by Knife
D7091-22	Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
D7234-22	Standard Test Method for Pull-Off Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
D7682-17(2022)	Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty
E337-15(2023)	Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
F1869-23	Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
F2170-19a	Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes (Includes all amendments and changes 1/9/2020).
G12-07	Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
G62-23	Standard Test Methods for Holiday Detection of Coatings used to Protect Pipelines
ASME Boiler and Pressure Vessel Code, Section XI	Rules for Inservice Inspection of Nuclear Power Plant Components
ISO 8502–03	Preparation of Steel Substrates before Application of Paint and Related Products -- Tests for the Assessment of Surface Cleanliness -- Part 3: Assessment of Dust on Steel Surfaces Prepared for Painting (Pressure-Sensitive Tape Method)
D4787-13(2018)	Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
D4940-15(2020)	Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives
D4537-12(2018)	Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities
D4414-95(2020)	Standard Practice for Measurement of Wet Film Thickness by Notch Gages
D3276-21	Standard Guide for Painting Inspectors (Metal Substrates)
D2583-13	Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
D4212-16(2023)	Standard Test Method for Viscosity by Dip-Type Viscosity Cups
D4214-23	Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
D4261-05(2018)	Standard Practice for Surface Cleaning Concrete Masonry Units for Coating
D4262-05(2018)	Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces
D3363-22	Standard Test Method for Film Hardness by Pencil Test
D4138-07a(2022)	Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means (Includes all amendments and changes 7/1/2022).
D16-24	Standard Terminology for Paint, Related Coatings, Materials, and Applications
D610-08(2019)	Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
D714-02(2017)	Standard Test Method for Evaluating Degree of Blistering of Paints

Odebírejte informace o nově vydaných normách ZDARMA:

Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.