Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
Automaticky přeložený název:
Standard Specification pro citlivé na tlak páska pro balení, vlákna zesílená
NORMA vydána dne 1.4.2012
Označení normy: ASTM D5330/D5330M-06(2012)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.4.2012
Kód zboží: NS-30759
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
bundling, closure, filament reinforced, packaging, tape , Bundling articles, Closure, Filament-reinforced adhesive tape, Packing/packaging materials/systems--specifications, Pressure-sensitive tapes--specifications, Shipping containers/materials/applications--specifications, Weathering, ICS Number Code 55.040 (Packaging materials and accessories)
Significance and Use | ||||||||||||||||||||||||||||||
The pressure-sensitive, filament-reinforced tapes covered by this specification are intended for use in closing and reinforcing fiberboard boxes and for bundling items for shipment. Type I is an impact and cut-resistant low-tensile strength tape, usually with polyester fiber reinforcement. It is intended for bundling and similar applications and used where a greater amount of stretch before break provides an improvement in impact resistance over glass filament reinforcement. Types II and III are intended for reinforcement of RSC's and similar fiberboard boxes, and for bundling where a snug bundle must be maintained and other similar applications. Type IV is intended for applications in which weather-resistance high-tensile strength tape is required. See Practice D1947 for details on applications. |
||||||||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||||||||
1.1 This specification covers filament-reinforced, pressure-sensitive adhesive tape. 1.2 The values stated in either inch-pound or SI units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore each system must be used independently of the other, without combining values in any way. 1.3 The following precautionary caveat pertains only to the test methods portion, Section 14, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||
|
Historická
1.5.2009
Historická
1.3.2009
Historická
1.4.2008
Historická
1.11.2009
Historická
1.8.2011
Historická
1.8.2010
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 29.11.2024 (Počet položek: 2 209 895)
© Copyright 2024 NORMSERVIS s.r.o.