Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Norma ASTM D4727/D4727M-22 15.4.2022 náhled

Doplňující informace

ASTM D4727/D4727M-22

Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes

Přeložit název

NORMA vydána dne 15.4.2022

Jazyk
Provedení	PDF - okamžité stažení - 1 667.60 Kč PDF + redline - ihned - 2 001.10 Kč Tištěné - 1 667.60 Kč Tisk + redline - 2 001.10 Kč
Dostupnost	SKLADEM
Cena	1667.60 Kč bez DPH
1 667.60 Kč

Informace o normě:

Označení normy: ASTM D4727/D4727M-22
Datum vydání normy: 15.4.2022
Kód zboží: NS-1055877
Počet stran: 10
Přibližná hmotnost: 30 g (0.07 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Balicí materiály a příslušenství

Anotace textu normy ASTM D4727/D4727M-22 :

This specification covers corrugated and solid fiberboard sheet stock (container grade) and cut shapes intended for use mainly in the fabrication of boxes and interior details (for example, pads, sleeves, liners, partitions, and die-cut sheets). Covered in this specification are three classes (domestic and domestic/fire retardant, weather resistant and weather resistant/fire retardant, and water and water-vapor resistant and water and water-vapor resistant/fire retardant) of corrugated fiberboard and two classes (domestic and domestic/fire retardant, and weather resistant and weather resistant/fire retardant) of solid fiberboard, with a variety of grades reflecting the varied performance levels of the fiberboards. Corrugated fiberboards shall be manufactured with two, three, or four facings for single-, double-, or triple-wall varieties, respectively, with each facing separated by and securely adhered to the corrugating medium of any suitable fiber. Solid fiberboards, on the other hand, shall be manufactured from plies securely and continuously laminated together. The facings of corrugated fiberboards and plies of solid fiberboards shall conform to the requirements specified. Tests for thickness, basis weight, puncture resistance, ply separation, bursting strength, flame spread, specific optical density, and edge crush shall be performed and shall conform to the requirements specified.

Keywords:

corrugated, cut shapes, domestic, fire retardant, sheets, solid fiberboard, weather resistant ,, ICS Number Code 55.040 (Packaging materials and accessories)

Doplňující informace

1. Scope

1.1?This specification covers fiberboard primarily used for the fabrication of boxes and interior details such as pads, sleeves, liners, partitions, die-cut sheets, etc.

1.2?The performance of fiberboard boxes is largely dependent on the paper components from which they are fabricated and, in the case of corrugated boxes, on the flute structure as well. Therefore, a variety of grades reflecting varied performance levels are specified.

1.3?The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. See IEEE/ASTM-SI-10 for conversion of units.

1.4?The following safety hazards caveat pertains only to the test portion, Sections 8 and 9, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

E662-21ae1	Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials (Includes all amendments and changes 9/16/2021).
IEEE/ASTM-SI-10	Standard for Use of the International System of Units (SI): The Modern Metric System
E162-22	Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
D6199-18a	Standard Practice for Quality of Wood Members of Containers and Pallets (Includes all amendments and changes 11/22/2018).
D6039/D6039M-18	Standard Specification for Open and Covered Wood Crates
D5639/D5639M-20	Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements
D5118/D5118M-22	Standard Practice for Fabrication of Fiberboard Shipping Boxes
D4675-14a(2022)	Standard Guide for Selection and Use of Flat Strapping Materials1 (Includes all amendments and changes 10/12/2022).
D996-23	Standard Terminology of Packaging and Distribution Environments
D4169-23	Standard Practice for Performance Testing of Shipping Containers and Systems
D585-97	Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
D3953-15(2022)	Standard Specification for Strapping, Flat Steel and Seals
D3951-18(2023)	Standard Practice for Commercial Packaging
T?410	Weight per Unit Area (Basis Weight or Substance)
	Water Absorptiveness of Sized (Non-Bibulous) Paper and Paperboard (Cobb Test)
T?411	Thickness (Caliper) of Paper and Paperboard

ISO 535	Paper and Board--Determination of Water Absorption--Cobb Method Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036, http://www.ansi.org.
Uniform Freight Classification Uniform Freight Classification is available from Rail Publication Service, 151 Ellis St. N.E., Suite 260, Atlanta, GA 30335–6021.
D5168-22	Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
T?812	Ply Separation of Solid and Corrugated Fiberboard (Wet)
T?811	Edge Crush Test
T?803	Puncture and Stiffness Test of Container Board
T?402	Standard Conditioning and Testing Atmosphere
D3950-23	Standard Specification for Strapping, Nonmetallic (and Joining Methods)
National Motor Freight Classification National Motor Freight Classification is available from National Motor Freight Traffic Association, Inc. (NMFTA), 1001 N. Fairfax St., Suite 600, Alexandria, VA 22314, http://www.nmfta.org.

Odebírejte informace o nově vydaných normách ZDARMA:

Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.