Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings
Automaticky přeložený název:
Standardní praxe pro přípravu Paint-Roller Pouzdra pro hodnocení architektury Coatings
NORMA vydána dne 1.11.2013
Označení normy: ASTM D5069/D5069M-13
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2013
Kód zboží: NS-29724
Počet stran: 2
Přibližná hmotnost: 6 g (0.01 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
break-in, paint roller, paint&ndash,roller cover, roller, test preparation, ICS Number Code 87.100 (Paint coating equipment)
Significance and Use | ||
4.1 Until a paint-roller cover is saturated with paint, only part of the paint loaded onto the paint-roller cover can be transferred to a surface being painted. The remainder of the paint is absorbed into the fabric of the paint-roller cover. The amount of paint absorbed by a paint-roller cover is inversely proportional to the amount already present within the paint-roller cover. By saturating the paint-roller cover before testing, quantitative inaccuracies of the amount of paint delivered to a surface are eliminated. 4.1.1 Using a saturated paint-roller cover enables the user to apply paint at controllable spreading rates. 4.1.2 Using a saturated paint-roller cover affords reproducibility, when repeating a test. |
||
1. Scope | ||
1.1 This practice covers the preparation or breaking-in of paint-roller covers for evaluation. 1.2 This practice is applicable to paint-roller covers having nap lengths up to 13 mm [1/2 in.]. Longer pile rollers can be adapted. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||
2. Referenced Documents | ||
|
Historická
1.11.2013
Historická
1.6.2012
Historická
1.6.2012
Historická
1.6.2012
Historická
1.11.2013
Historická
1.11.2012
Poslední aktualizace: 06.05.2024 (Počet položek: 2 897 584)
© Copyright 2024 NORMSERVIS s.r.o.