Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Testing Fracture of Level Paintbrush Filaments
Automaticky přeložený název:
Standardní zkušební metoda pro testování Zlomenina Level štětec vláken,
NORMA vydána dne 1.11.2012
Označení normy: ASTM D7233-08(2012)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2012
Kód zboží: NS-37942
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
bending, ICS Number Code 87.100 (Paint coating equipment)
Significance and Use |
3.1 This method is intended to evaluate filaments for suitability of use in paintbrushes prior to manufacture. Filament fracture resistance is very important because paintbrushes are bent or flexed during painting and it is necessary that the filaments are not permanently deformed with usage. |
1. Scope |
1.1 This test method covers a procedure for determining the number of fractures present when paintbrush filaments are bent. 1.2 This method is applicable only to monofilaments with consistent longitudinal cross sectional dimensions commonly referred to as “level” filaments. 1.3 The values derived are in percent fractured filaments. For example, 2 fractured out of 18 filaments tested = 2/18 or 11 %. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
Historická
1.11.2012
Historická
1.11.2013
Historická
1.6.2012
Historická
1.6.2012
Historická
1.6.2012
Historická
1.11.2013
Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 15.05.2024 (Počet položek: 2 900 316)
© Copyright 2024 NORMSERVIS s.r.o.