Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM D5055-19e1

Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists (Includes all amendments and changes 5/25/2023).

Přeložit název

NORMA vydána dne 1.3.2019

Jazyk
Provedení	PDF - okamžité stažení - 2 304.70 Kč Tištěné - 2 304.70 Kč
Dostupnost	SKLADEM
Cena	2 304.70 Kč bez DPH
2 304.70 Kč

Informace o normě:

Označení normy: ASTM D5055-19e1
Datum vydání normy: 1.3.2019
Kód zboží: NS-982042
Počet stran: 38
Přibližná hmotnost: 114 g (0.25 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Dřevěné polotovary

Anotace textu normy ASTM D5055-19e1 :

This specification gives procedures for establishing, monitoring, and reevaluating structural capacities of prefabricated wood I-joists. Capacities considered are shear, moment, and stiffness. Procedures for establishing common details are given and certain design considerations specific to wood I-joists are itemized. Qualification is required for certain common details of I-joist application since they often influence structural capacities. All capacities are to be reported with three significant digits. Shear capacity qualification, moment capacity qualification, end joint qualification, stiffness capacity and creep qualification, and details of end use shall be established to meet the requirements prescribed. Design values are determined from the analysis and capacities as specified. The bearing capacity and regarded solid sawn lumber flanges shall be reevaluated to meet the requirements prescribed. The shear and flange material, and empirical moment capacity shall be tested to meet the requirements prescribed.

Keywords:

ICS Number Code 79.080 (Semi-manufactures of timber)

Doplňující informace

1. Scope

1.1 General—This specification gives procedures for establishing, monitoring, and reevaluating structural capacities of prefabricated wood I-joists. Capacities considered are shear, reaction, moment, and stiffness. Procedures for establishing common details are given and certain design considerations specific to wood I-joists are itemized.

1.2 Contents of the Standard—An index and brief description of the main features of this specification are given in X2.1.1.

1.3 Development of the Standard—The development and intent of this specification is discussed in Appendix X2.

1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

PS-20	American Softwood Lumber Standard

D7480-21	Standard Guide for Evaluating the Attributes of a Forest Management Plan
E699-16	Standard Specification for Agencies Involved in Testing, Quality Assurance, and Evaluating of Manufactured Building Components
IEEE/ASTM SI 10	Standard for Use of the International System of Units (SI): The Modern Metric System
PS-1	Structural Plywood
E4-21	Standard Practices for Force Calibration and Verification of Testing Machines
E529-04(2018)	Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
D198-22a	Standard Test Methods of Static Tests of Lumber in Structural Sizes (Includes all amendments and changes 10/14/2022).
D245-22	Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber
D1990-19	Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens
D2559-12a(2018)	Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions (Includes all amendments and changes 8/10/2018).
D2915-17(2022)	Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products
D4761-19	Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials
D5456-21e1	Standard Specification for Evaluation of Structural Composite Lumber Products (Includes all amendments and changes 6/9/2021).
D5457-23	Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
D7247-17	Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures

Doporučujeme:

EviNor - Řízení a aktualizace českých norem

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.