Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables
Automaticky přeložený název:
Standardní Průvodce pro výběr materiálů pro použití pro izolaci, opláštění a síla komponenty v Fiber-optické kabely
NORMA vydána dne 1.11.2013
Označení normy: ASTM D4967-99(2013)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2013
Kód zboží: NS-29326
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
acrylates, aramids, fluoroplastics, glass fibers, glass-fibers reinforced plastics, grease and similar materials, nylon, polybutylene, polycarbonate, polyester tape, polyethylene, polyimide tape, polypropylene, polyurethane, poly(vinyl chloride), rubber, silicone rubber, steel, thermoplastic elastomer, thermoplastic polyester, ICS Number Code 33.180.01 (Fibre optic systems in general),33.180.10 (Fibres and cables)
Significance and Use | |
4.1 The lists of components and materials are useful in enhancing the user's understanding of the technology and construction of fiber-optics cables and the development of performance standards for cables. 4.2 This guide is intended for use by all parties involved with fiber optics: materials suppliers, cable manufacturers, and end-users. |
|
1. Scope | |
1.1 This guide is intended to provide a list of materials commonly used in components that provide insulation, jacketing and strength in fiber-optic cables. Where these materials are covered by ASTM standards, an appropriate reference is made. Due to changing technology, not all materials being used are necessarily listed here. 1.2 This guide does not include materials used in components for optical purposes (optical fiber and its coating) or external metallic armoring (such as for a barrier to rodents). 1.3 This guide offers two general lists of materials: 1.3.1 A subdivision of fiber-optic cable construction into components that are used for insulation, jacketing, or strength, with a generic material classification for specific applications in each component (see Section 5); and 1.3.2 An alphabetical list of the generic material classifications, showing ASTM standards where they exist (see Material |
ASTM Specification |
Acrylates |
... |
Aramids: |
|
fibers |
D3317 |
tape |
... |
Fluoroplastics: |
|
ECTFE |
D3275 |
ETFE |
D3159 |
FEP |
D2116 |
PFA |
D3307 |
PTFE |
D1457 |
PVDF |
D3222 |
Glass fibers |
... |
Glass-fiber reinforced plastics |
... |
Grease and similar materials |
D4730, D4731, D4732 |
Nylon |
D4066 |
Polybutylene |
D4730, D4731, D4732 |
Polycarbonate |
D3935 |
Polyester tape |
D3664 |
Polyethylene |
D1248 |
Polyimide tape |
... |
Polypropylene |
D4101 |
Polyurethane |
... |
Poly(vinyl chloride) |
D2287 |
Rubber |
D4730, D4731, D4732 |
Silicone rubber |
D2526 |
Steel |
... |
Thermoplastic elastomer |
D4246 |
Thermoplastic polyester |
D4507 |
Standard Specification for FEP Resin Molding and Extrusion Materials |
|
Standard Classification System and Basis for Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds |
|
Standard Specification for Ozone-Resisting Silicone Rubber Insulation for Wire and Cable (Withdrawn 2006) |
|
Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials |
|
Standard Terminology Relating to Electrical Insulation |
|
Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996) |
|
Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
|
Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable, 90 °C Operation |
|
Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials |
|
Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
|
Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material |
|
Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment (Withdrawn 2022) |
|
Specification for High Modulus, Organix Yarn and Roving (Withdrawn 1986) |
|
Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials |
|
Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
|
Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials |
|
Specification for Thermoplastic Polyester (TPES) Materials (Withdrawn 1999) |
|
Standard Specification for Flooding Compounds for Telecommunications Wire and Cable |
|
Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable |
|
Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable |
Historická
1.1.2013
Historická
1.10.2008
Historická
1.5.2009
Historická
1.5.2010
Poskytování aktuálních informací o legislativních předpisech vyhlášených ve Sbírce zákonů od roku 1945.
Aktualizace 2x v měsíci !
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 18.08.2024 (Počet položek: 2 342 672)
© Copyright 2024 NORMSERVIS s.r.o.