Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines
Automaticky přeložený název:
Standard Specification pro minerální a syntetické mazacího oleje použitého v páře nebo plynových turbín
NORMA vydána dne 1.10.2013
Označení normy: ASTM D4304-13
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2013
Kód zboží: NS-26763
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
combined cycle turbine oil, gas turbine oil, mineral oil, R and O oils, steam turbine oil, synthetic turbine oil, turbine lubricating oils, turbine lubrication systems, ICS Number Code 75.100 (Lubricants, industrial oils and related products)
1. Scope | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1.1 This specification covers mineral and synthetic (API group I, II, III, or IV) oils used in steam and gas turbine lubrication systems where the performance requirements demand highly refined mineral or synthetic base oils compounded with rust and oxidation inhibitors plus selected additives as needed to control foam, wear, demulsibility, and so forth. This standard may also be applied to “combined cycle” turbine systems, where a single lubricant circulating system is used to supply oil to a steam and gas turbine configured in tandem either on a single or separate shaft for enhanced energy efficiency. 1.2 This specification is intended to define the properties of mineral and synthetic oil-based turbine lubricating oils that are functionally interchangeable with existing oils of this type, are compatible with most existing machinery components, and with appropriate field maintenance, will maintain their functional characteristics. 1.3 This specification is intended to define only new lubricating oil before it is installed in the machinery. 1.4 This specification is intended to be used as a guide. It is possible that oils that do not meet this specification may perform satisfactorily in some turbines. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Historická
1.7.2013
Historická
1.7.2013
Historická
1.12.2011
Historická
1.9.2014
Historická
1.8.2011
Historická
15.9.2013
Poslední aktualizace: 22.12.2024 (Počet položek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.