Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM D3839-14

Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe

Automaticky přeložený název:

Standardní Průvodce pro podzemní komplex a ldquo, CSF-rdquo; (Vyztuženého skleněnými vlákny Teplem-pryskyřice) Pipe

NORMA vydána dne 1.3.2014

Jazyk
Provedení	PDF - okamžité stažení - 2 214.70 Kč Tištěné - 2 214.70 Kč
Dostupnost	SKLADEM
Cena	2 214.70 Kč bez DPH
2 214.70 Kč

Informace o normě:

Označení normy: ASTM D3839-14
Poznámka: NEPLATNÁ
Datum vydání normy: 1.3.2014
Kód zboží: NS-25051
Počet stran: 12
Přibližná hmotnost: 36 g (0.08 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Trubky z plastické hmoty

Anotace textu normy ASTM D3839-14 :

Keywords:

backfill, bedding, fiberglass pipe, haunching, soil stiffness, underground installation, ICS Number Code 23.040.20 (Plastic pipes)

Doplňující informace

Significance and Use

4.1 This practice is for use by designers and specifiers, manufacturers, installation contractors, regulatory agencies, owners, and inspection organizations involved in the construction of buried fiberglass pipelines. As with any practice, modifications may be required for specific job conditions, or for special local or regional conditions. Recommendations for inclusion of this practice in contract documents for a specific project are given in Appendix X1.

1. Scope

1.1 This practice establishes procedures for the burial of pressure and nonpressure “fiberglass” (glass-fiber-reinforced thermosetting-resin) pipe in many typically encountered soil conditions. Included are recommendations for trenching, placing pipe, joining pipe, placing and compacting backfill, and monitoring deflection levels. Guidance for installation of fiberglass pipe in subaqueous conditions is not included.

1.2 Product standards for fiberglass pipe encompass a wide range of product variables. Diameters range from 1 in. to 13 ft (25 mm to 4000 mm) and pipe stiffnesses range from 9 to over 72 psi (60 to 500 kPa) with internal pressure ratings up to several thousand pound force per square inch. This standard does not purport to consider all of the possible combinations of pipe, soil types, and natural ground conditions that may occur. The recommendations in this practice may need to be modified or expanded to meet the needs of some installation conditions. In particular, fiberglass pipe with diameters of a few inches are generally so stiff that they are frequently installed in accordance with different guidelines. Consult with the pipe manufacturer for guidance on which practices are applicable to these particular pipes.

1.3 The scope of this practice excludes product-performance criteria such as a minimum pipe stiffness, maximum service deflection, or long-term strength. Such parameters may be contained in product standards or design specifications, or both, for fiberglass pipe. It is incumbent upon the specified product manufacturer or project engineer to verify and ensure that the pipe specified for an intended application, when installed in accordance with procedures outlined in this practice, will provide a long-term, satisfactory performance in accordance with criteria established for that application.

1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

D8-22a	Standard Terminology Relating to Materials for Roads and Pavements (Includes all amendments and changes 6/15/2022).
D653-22	Standard Terminology Relating to Soil, Rock, and Contained Fluids
D698-12(2021)	Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))
D883-24	Standard Terminology Relating to Plastics
D1556-07	Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
D2167-15	Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method (Withdrawn 2024)
D2216-19	Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
AWWA	Manual of Practice M45 Fiberglass Pipe Design Manual Available from American Water Works Association (AWWA), 6666 W. Quincy Ave., Denver, CO 80235, http://www.awwa.org.
D4959-24	Standard Test Method for Determination of Water Content of Soil By Direct Heating
D5030-04	Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit
D5080-20	Standard Test Method for Rapid Determination of Percent Compaction
D5821-13(2017)	Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
D2488-17e1	Standard Practice for Description and Identification of Soils (Visual-Manual Procedures) (Includes all amendments and changes 4/4/2018).
F1668-16(2022)	Standard Guide for Construction Procedures for Buried Plastic Pipe
AASHTO LRFD	Bridge Design Specifications, 2nd Edition, American Association of State Highway and Transportation Officials Available from American Association of State Highway and Transportation Officials (AASHTO), 444 N. Capitol St., NW, Suite 249, Washington, DC 20001.
AASHTO M145	Classification of Soils and Soil Aggregate Mixtures
D6938-23	Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
D7382-20	Standard Test Methods for Determination of Maximum Dry Unit Weight of Granular Soils Using a Vibrating Hammer
F412-23	Standard Terminology Relating to Plastic Piping Systems
D4253-16e1	Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table (Includes all amendments and changes 11/21/2019).
D4254-16	Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
D4318-17e1	Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils (Includes all amendments and changes 4/17/2018).
D4564-08	Standard Test Method for Density and Unit Weight of Soil in Place by the Sleeve Method
D4643-17	Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating
D4914-08	Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
D4944-18	Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
D2487-17e1	Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) (Includes all amendments and changes 4/2/2020).

Podobné normy:

ASTM D3965-11

Historická
1.9.2011

ASTM D4396-06

Historická
1.12.2006

ASTM D5365-12

Historická
1.4.2012

ASTM D5677-05(2010)..

Historická
1.11.2010

ASTM D5813-04(2012)..

Historická
1.10.2012

ASTM D6041-11

Historická
1.12.2011

Doporučujeme:

Aktualizace technických norem

Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.

Chcete vědět více informací? Podívejte se na tuto stránku.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.