Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
Automaticky přeložený název:
Standardní zkušební metody analýzy rozpustných v oleji Petroleum sulfonany kapalinová chromatografie
NORMA vydána dne 1.1.2011
Označení normy: ASTM D3712-05(2011)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.1.2011
Kód zboží: NS-24586
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
ammonium sulfonate, barium sulfonate, calcium sulfonate, inorganic salts, liquid chromatography, magnesium sulfonate, mineral oil, molecular weight, petroleum sulfonates, Sulfonate content, Acidity, alkalinity, pH--petroleum products, Calcium sulfonate content, Inorganic salts content, Liquid chromatography (LC), Mineral oils, Molecular weight--average, Petroleum sulfonates, Sodium petroleum sulfonates, Specific gravity--petroleum products, ICS Number Code 75.080 (Petroleum products in general)
Significance and Use | ||||
This test method provides a means of determining sulfonate content and of classifying and characterizing natural and synthetic petroleum sulfonate products by sulfonate content and average molecular weight. Purity of sodium sulfonate products is measured by basicity and inorganic salt contents and the reserve alkalinity of alkaline earth sulfonates by the total base number. |
||||
1. Scope | ||||
1.1 This test method covers the analysis of refined and crude natural and synthetic oil-soluble sulfonate products. Resins, if present, are recovered with the oil phase and carboxylates are recovered as sulfonates. 1.2 This test method covers the determination of mineral oil, sodium sulfonate, inorganic salts, water, basicity or acidity, average molecular weight, and relative density of sodium sulfonate products. 1.3 This test method covers the determination of mineral oil, sulfonate, water, base number, average molecular weight, and relative density of calcium, barium, magnesium, and ammonium sulfonate products. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||
2. Referenced Documents | ||||
|
Historická
1.10.2013
Historická
1.10.2013
Historická
15.6.2013
Historická
15.6.2013
Historická
1.6.2012
Historická
1.5.2013
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.