Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM D3306-14
Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
Automaticky přeložený název:
Standardní specifikace pro glykol Základní chladicí kapaliny motoru pro automobilový a lehkých užitkových Service
NORMA vydána dne 15.4.2014
Informace o normě:
Označení normy: ASTM D3306-14
Poznámka: NEPLATNÁ
Datum vydání normy: 15.4.2014
Kód zboží: NS-23216
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Chladicí prostředky. Mrazicí prostředky. Mrazuvzdorné prostředky
Anotace textu normy ASTM D3306-14 :
Keywords:
engine coolant, engine coolant concentrate, ethylene glycol, glycerine, glycerol, light duty engine coolant, prediluted engine coolant, propylene glycol, 1,2,3-propane diol, ICS Number Code 71.100.45 (Refrigerants and antifreezes)
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1.1 This specification covers the requirements for ethylene glycol or propylene glycol base engine coolants used in automobiles or other light duty service cooling systems. When concentrates are used at 40 to 70 % concentration by volume in water, or when prediluted glycol base engine coolants 50 volume % or higher engine coolant concentrate are used without further dilution, they will function effectively to provide protection against freezing, boiling, and corrosion. 1.2 The coolants governed by this specification are categorized as follows:
1.3 The values stated in SI units
are to be regarded as the standard. The values in parentheses are
for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
|
Federal Method 2540B
|
Total Dissolved Solids Dried at 103-105C Standard Method for the Examination of Water and Wastewater. American Public Health Association, et al, 800 I Street, N.W. Washington, DC 20001-3710, http://www.apha.org.
|
|
Standard Specification for Engine Coolant Grade Glycol
|
|
Standard Test Methods for Chloride Ion In Water
|
|
Standard Test Method for Sulfate Ion in Water
|
|
Standard Test Method for Percent Ash Content of Engine Coolants
|
|
Standard Test Method for Boiling Point of Engine Coolants
|
|
Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
|
|
Standard Test Method for Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
|
|
Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method (Includes all amendments and changes 9/21/2022).
|
|
Standard Test Method for Hardness in Water
|
|
Standard Test Method for Freezing Point of Aqueous Engine Coolants
|
|
Standard Test Method for pH of Engine Coolants and Antirusts
|
|
Standard Test Method for Anions in Water by Suppressed Ion Chromatography
|
|
Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
|
|
Standard Terminology for Engine Coolants and Related Fluids
|
|
Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
|
|
Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
|
|
Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
|
|
Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
|
|
Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
|
|
Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
|
|
Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
|
|
Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
|
|
Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
|
|
Standard Test Method for Corrosion Test for Engine Coolants in Glassware
|
|
Standard Test Methods for pH of Water
|
|
Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service (Withdrawn 2019)
|
|
Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service (Withdrawn 2019)
|
|
Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
|
|
Standard Specification for Engine Coolant Grade Glycerin
|
|
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
|
|
Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
|
|
Standard Test Method for Trace Chloride Ion in Engine Coolants
|
|
Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines |
Doporučujeme:
Aktualizace technických norem
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
