Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM E1177-23

Standard Specification for Engine Coolant Grade Glycol

Přeložit název

NORMA vydána dne 15.5.2023

Jazyk
Provedení	PDF - okamžité stažení - 1 477.30 Kč PDF + redline - ihned - 1 772.80 Kč Tištěné - 1 477.30 Kč Tisk + redline - 1 772.80 Kč
Dostupnost	SKLADEM
Cena	1477.30 Kč bez DPH
1 477.30 Kč

Informace o normě:

Označení normy: ASTM E1177-23
Datum vydání normy: 15.5.2023
Kód zboží: NS-1143590
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Alkoholy. Étery
Chladicí prostředky. Mrazicí prostředky. Mrazuvzdorné prostředky

Anotace textu normy ASTM E1177-23 :

This specification establishes the testing and requirements of four types of engine coolant grade ethylene glycol and propylene glycol, including virgin glycols and those derived from the recycling of vehicle engine coolants and industrial source glycols. Types EG-1 and PG-1 cover glycols with sufficiently low limits on components to allow a blended coolant to meet most OEM (Original Equipment Manufacturer) specifications. These types will probably be virgin materials, although redistillation could produce a sufficiently pure product. Types EG-2 and PG-2 cover glycol that will be suitable for many coolants, and can either be redistilled or virgin. The commercial products shall be suitably sampled and tested, and shall conform accordingly to specified values of the following physical and chemical properties: clarity; color (Pt/Co scale); relative density; pH by volume in distilled water; acidity as acetic acid; composition by mass of individual glycols (including ethylene glycol, propylene glycol, dipropylene glycol, and others); total composition by mass of all glycols; water content; glycol ester content; and the maximum content for nitrites, nitrates, phosphates, silicon, chloride, sulfate, boron, aluminum, calcium, copper, iron, magnesium, lead, zinc, and iron.

Keywords:

anti-freeze, engine coolant, ethylene, glycol, propylene glycol, recycled,, ICS Number Code 71.080.60 (Alcohols. Ethers),71.100.45 (Refrigerants and antifreezes)

Doplňující informace

1. Scope

1.1?This specification covers commercial products, engine coolant grade ethylene glycol and propylene glycol, including virgin glycols and those derived from the recycling of vehicle engine coolants and industrial source glycols.

1.2?Types EG-1 and PG-1 cover glycols with sufficiently low limits on components to allow a blended coolant to meet most OEM (Original Equipment Manufacturer) specifications. These types will probably be virgin materials, although redistillation could produce a sufficiently pure product. Types EG-2 and PG-2 cover glycol that will be suitable for many coolants. These types can be either redistilled or virgin.

1.3?The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

D1287-11(2020)	Standard Test Method for pH of Engine Coolants and Antirusts
E300-03(2022)	Standard Practice for Sampling Industrial Chemicals
E202-18	Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
D6130-11(2018)	Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
D5931-20	Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
D5827-22	Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
E394-22	Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
D1123-22a	Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method (Includes all amendments and changes 9/21/2022).
D4725-15(2023)	Standard Terminology for Engine Coolants and Related Fluids
D1122-22	Standard Test Method for Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
D1209-05(2019)	Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
D4052-22	Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
D3634-21	Standard Test Method for Trace Chloride Ion in Engine Coolants
D1613-17(2023)	Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products

Doporučujeme:

Aktualizace zákonů

Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.