Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM C610-05

Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation

Automaticky přeložený název:

Standardní specifikace pro Čelní expandovaný perlit Block a potrubí Tepelná izolace

NORMA vydána dne 1.4.2005

Jazyk
Provedení	Online zabezpečené PDF - 1 832.10 Kč Tištěné - 1 832.10 Kč
Dostupnost	SKLADEM
Cena	1832.10 Kč bez DPH
1 832.10 Kč

Informace o normě:

Označení normy: ASTM C610-05
Poznámka: NEPLATNÁ
Datum vydání normy: 1.4.2005
Kód zboží: NS-14239
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM C610-05 :

Keywords:

block, expanded perlite, fittings, molded, pipe, thermal insulation, ICS Number Code 91.100.60 (Thermal and sound insulating materials)

Doplňující informace

1. Scope

1.1 This specification covers molded expanded perlite block, fittings, and pipe thermal insulation intended for use on surfaces with temperatures between 80 to 1200°F (27 to 649°C).

1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

When the installation or use of thermal insulation materials, accessories, and systems may pose safety or health problems, the manufacturer shall provide the user appropriate current information regarding any known problems associated with the recommended use of the company's products and shall also recommend protective measures to be employed in their safe utilization. The following safety caveat applies only to the test methods portion of this specification:This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

C177-19e1	Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (Includes all amendments and changes 2/23/2023).
E84-26a	Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 4/15/2026).
C302-13(2022)	Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
C303-21	Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation
C335/C335M-23	Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
C356-22	Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
C390-08(2024)	Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
C411-19	Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
C421-26	Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation
C165-23	Standard Test Method for Measuring Compressive Properties of Thermal Insulations
C168-25	Standard Terminology Relating to Thermal Insulation
C585-22	Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
C795-08(2023)	Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
C450-18(2026)	Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
E136-26	Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C
C518-21	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
C1045-19	Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
C1058/C1058M-10(2023)	Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
C1616-25	Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
C1617-24	Standard Test Method for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Carbon Steel
C1763-20(2025)	Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
C203-22	Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation

Odebírejte informace o nově vydaných normách ZDARMA:

Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.