Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM B983-13
Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube
Automaticky přeložený název:
Standardní specifikace pro srážek zakalený či tváření za studena , bezešvé slitiny niklu Potrubní
NORMA vydána dne 1.2.2013
Informace o normě:
Označení normy: ASTM B983-13
Poznámka: NEPLATNÁ
Datum vydání normy: 1.2.2013
Kód zboží: NS-8986
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM B983-13 :
Keywords:
seamless cold worked pipe, seamless cold worked tube, seamless precipitation hardened pipe, seamless precipitation hardened tube, UNS N07022, UNS N07725, UNS N07740, UNS N09945, UNS N09925, UNS N07718, UNS N10276, UNS N06985, ICS Number Code 23.040.15 (Non-ferrous metal pipes)
Doplňující informace
| 1. Scope | ||||||||
|
1.1 This specification covers high strength, seamless pipe and tube of nickel alloys (UNS N07022, UNS N07725, UNS N07740, UNS N09945, UNS N09925, UNS N07718, UNS N10276, UNS N06985) Element |
UNS |
UNS |
UNS |
UNS |
UNS |
UNS |
UNS |
UNS |
|
Carbon |
0.010 max |
0.03 max |
0.005-0.08 |
0.005-0.04 |
0.03 max |
0.08 max |
0.02 max |
0.015 max |
|
Manganese |
0.5 max |
0.35 max |
1.0 max |
1.0 max |
1.00 max |
0.35 max |
1.0 max |
1.0 max |
|
Silicon |
0.08 max |
0.20 max |
1.0 max |
0.5 max |
0.50 max |
0.35 max |
0.08 max |
1.0 max |
|
Phosphorous |
0.025 max |
0.015 max |
0.03 max |
0.03 max |
... |
0.015 max |
0.030 max |
0.04 max |
|
Sulfur |
0.015 max |
0.010 max |
0.03 max |
0.03 max |
0.030 max |
0.015 max |
0.030 max |
0.03 max |
|
Chromium |
20.0-21.4 |
19.0-22.5 |
23.5-25.5 |
19.5-23.0 |
19.5-23.5 |
17.0-21.0 |
14.5-16.5 |
21.0-23.5 |
|
Cobalt |
1.0 max |
... |
15.0-22.0 |
... |
... |
1.0 max |
2.5 max |
5.0 max |
|
Molybdenum |
15.5-17.4 |
7.00-9.50 |
2.0 max |
3.0-4.0 |
2.50-3.50 |
2.80-3.30 |
15.0-17.0 |
6.0-8.0 |
|
Columbium |
... |
2.75-4.00 |
... |
2.4-4.5 |
0.50 max |
4.75-5.50 |
... |
... |
|
Titanium |
... |
1.00-1.70 |
0.5-2.5 |
0.5-2.5 |
1.90-2.40 |
0.65-1.15 |
... |
... |
|
Aluminum |
0.5 max |
0.35 max |
0.2-2.0 |
0.01-0.7 |
0.10-0.50 |
2.20-0.80 |
... |
... |
|
Zirconium |
... |
... |
... |
... |
... |
... |
... |
... |
|
Boron |
0.006 max |
... |
0.0006–0.006 |
... |
... |
0.006 max |
... |
... |
|
Iron |
1.8 max |
RemainderB |
3.0 max |
RemainderB |
22.0 minA |
RemainderB |
4.0-7.0 |
18.0-21.0 |
|
Copper |
0.5 max |
... |
0.50 max |
1.5-3.0 |
1.50-3.00 |
0.30 max |
... |
1.5-2.5 |
|
Nickel |
RemainderB |
55.0–59.0 |
RemainderB |
45.0-55.0 |
38.0-46.0 |
50.0-55.0 |
RemainderB |
RemainderB |
|
Tantalum |
0.2 max |
... |
... |
... |
... |
... |
... |
... |
|
Tungsten |
0.8 max |
... |
... |
... |
... |
... |
3.0-4.5 |
1.5 max |
|
Columbium + |
... |
... |
0.50–2.5 |
... |
... |
... |
... |
0.50 max |
|
Vanadium |
... |
... |
... |
... |
... |
... |
0.35 max |
... |
1.2 Pipe and tube shall be supplied
in the cold worked or cold worked and precipitations hardened or
solution annealed plus precipitation hardened and descaled
conditions. When atmosphere control is used, descaling is not
necessary.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
|
Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube |
|
|
Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
|
|
Standard Test Methods for Tension Testing of Metallic Materials |
|
|
Standard Terminology Relating to Non-ferrous Metals and Alloys |
Odebírejte informace o nově vydaných normách ZDARMA:
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
