Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM B751-08
Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
Automaticky přeložený název:
Standardní specifikace pro všeobecné požadavky na Nikl a slitiny niklu svařovaných trubek
NORMA vydána dne 1.11.2008
Informace o normě:
Označení normy: ASTM B751-08
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2008
Kód zboží: NS-7961
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM B751-08 :
Keywords:
welded tube,Condenser and heat exchanger systems--nickel alloy, General delivery requirements--Ni/Ni alloys, Nickel alloy tube--specifications, Nickel-chromium-iron alloys--specifications, Welded Ni/Ni alloy tube--specifications, Chromium-nickel-iron-molybdenum-copper alloy, Udimet alloy, UNS N06600 (Ni-Cr alloy, Inconel 600), UNS N06625 (Ni-Cr alloy, Inconel 625), UNS N08020 (Ni-Fe-Cr alloy, Carpenter 20Cb3), UNS N08366 (Ni-Fe-Cr alloy, AL-6X), UNS N08800 (Fe-Ni-Cr alloy, Incoloy 800)
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||||||||||||||||||||||||
|
1.1 This specification contains various
requirements that, with the exception of Sections 6 and 7, are
mandatory requirements to the following ASTM nickel and nickel
alloy, longitudinally welded tubular product
specifications:
1.2 One or more of the test requirements of Section 6 apply only if specifically stated in the product specification or in the purchase order. 1.3 In case of conflict between a requirement of the product specification and a requirement of this general specification, only the requirement of the product specification need be satisfied. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||||||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||||||||||
|
Doporučujeme:
