Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
Automaticky přeložený název:
Standard Specification pro hliníku a hliníkových slitin vytlačované kulatých trubek pro univerzální aplikace
NORMA vydána dne 1.1.2015
Označení normy: ASTM B491/B491M-15
Poznámka: NEPLATNÁ
Datum vydání normy: 1.1.2015
Kód zboží: NS-6896
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
aluminum alloy, extruded round tubes,, ICS Number Code 23.040.15 (Non-ferrous metal pipes)
1. Scope | ||||||||||||||||||||||||||||
1.1 This specification covers aluminum and aluminum-alloy extruded round tubes either in coils or straight lengths, for general purpose applications such as refrigeration service, gas lines, oil lines, and instrument lines, in the alloys (Note 2) and tempers shown in Table 2 [Table 3], in outside diameters of 0.250 through 0.750 in. [6.00 through 20.00 mm]. For diameters over 0.500 through 0.750 in. [over 12.50 through 20.00 mm], the diameter and wall-thickness tolerances and eddy-current test parameters, if required, shall be agreed upon by the producer and the purchaser. Only tubes in aluminum 1200-H111 and 1235-H111 are sized after extrusion to minimize ovalness. 1.2 Alloy and temper designations are in
accordance with ANSI H35.1/H35.1(M). The equivalent Unified
Numbering System alloy designations are those of Table 1 preceded by A9 (for example,
A91050 for aluminum 1050), in accordance with Practice E527.
Note 1: For extruded tubes see Specification B221, and for drawn tubes for
general-purpose applications see Specification B483.
Note 2: Throughout this specification the term alloy in the general sense includes
aluminum as well as aluminum alloy.
Note 3: For inch-pound orders specify B491; for metric orders specify
B491M. Do not mix
units.
1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2. 1.4 The values stated in either inch-pound or SI units are to be regarded separately as standards. The SI units are shown either in brackets or in separate tables. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from two systems will result in nonconformance with the specification. |
||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||
|
Historická
1.10.2014
Historická
1.10.2010
Historická
1.10.2010
Historická
1.10.2011
Historická
1.12.2006
Historická
1.10.2014
Poslední aktualizace: 19.04.2024 (Počet položek: 2 860 954)
© Copyright 2024 NORMSERVIS s.r.o.