Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM B429/B429M-10e1 15.6.2010 náhled

Doplňující informace

ASTM B429/B429M-10e1

Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube (Withdrawn 2019) (Includes all amendments And changes 12/1/2020).

Automaticky přeložený název:

Standardní specifikace pro hliníkových slitin Extrudovaný strukturálních Potrubní

NORMA vydána dne 15.6.2010

Jazyk
Provedení	PDF - okamžité stažení - 2 109.30 Kč Tištěné - 2 109.30 Kč
Dostupnost	SKLADEM
Cena	2 109.30 Kč bez DPH
2 109.30 Kč

Informace o normě:

Označení normy: ASTM B429/B429M-10e1
Poznámka: NEPLATNÁ
Datum vydání normy: 15.6.2010
Kód zboží: NS-6661
Počet stran: 11
Přibližná hmotnost: 33 g (0.07 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Výrobky z hliníku

Anotace textu normy ASTM B429/B429M-10e1 :

Keywords:

aluminum alloy, extruded pipe, extruded tube, Aluminum--specifications, Aluminum alloys (pipe)--specifications, Aluminum alloys (structural)--specifications, Aluminum alloys (tube)--specifications, Aluminum pipe--specifications, Aluminum tube--specifications, Bridge/structural materials--specifications, Structural aluminum--specifications, UNS A96061 (Wr. alum. alloy), UNS A96063 (Wr. alum. alloy)--pipe/tube, ICS Number Code 77.150.10 (Aluminium products)

Doplňující informace

1. Scope

empers shown in , and in those standard sizes shown in , as well as in other nonstandard sizes as agreed upon between the purchaser and supplier. Such pipe and tube is intended for use in structural applications such as highway and bridge rails, chain-link fence posts, handrails, sign structures, awning supports, lighting brackets, etc. Structural pipe and tube is not intended for fluid-carrying applications involving pressure.Note 1

For drawn seamless tube used in pressure applications see Specifications B 210 and B 210M, for seamless pipe and seamless extruded tube used in pressure applications see Specifications B 241/B 241M, and for drawn tube and pipe for general purpose applications see Specification B 483/B 483M.

1.2 Alloy and temper designations are in accordance with ANSI H35.1. The equivalent Unified Numbering System alloy designations are those of preceded by A9, for example, A96061 for alloy 6061 in accordance with Practice E 527.

1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see .

1.4 UnitsThe values stated in either inch-pound units or SI units are to be regarded separately as standard. SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the specification.

1.4.1 While this standard is a combined SI and inch-pound standard, standard pipe sizes are not applicable to SI units, therefore non-rationalized SI units (soft conversions) are shown for reader convenience. Rationalized [hard converted] SI units are shown in brackets while non-rationalized (soft converted) SI units are shown in parentheses.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

B918-01	Standard Practice for Heat Treatment of Wrought Aluminum Alloys
B807/B807M-20	Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
B666/B666M-20	Standard Practice for Identification Marking of Aluminum and Magnesium Products
B557M-15(2023)	Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
B557-15(2023)	Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
E1251-17a	Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry (Includes all amendments and changes 10/26/2017).
H35.2(M)	Dimensional Tolerance for Aluminum Mill Products [Metric]
MIL-STD-129	Marking for Shipment and Storage Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http://dodssp.daps.dla.mil.
Fed. Std. No. 123	Marking for Shipment (Civil Agencies)
CEN EN 14242	Aluminum and Aluminum Alloys, Chemical Analysis, Inductively Coupled Plasma Optical Emission Spectral Analysis Available from European Committee for Standardization (CEN), 36 rue de Stassart, B-1050, Brussels, Belgium, http://www.cenorm.be.
E716-16(2021)e2	Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry (Includes all amendments and changes 9/7/2022).
B483/B483M-21	Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications
B241/B241M-22	Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
B210M-12	Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes (Metric) (Withdrawn 2019)
B660-23	Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
E527-23	Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
E34-11	Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
B210-12	Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E607-02	Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere
B945-21	Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers
B881-17	Standard Terminology Relating to Aluminum- and Magnesium-Alloy Products

Podobné normy:

ASTM B947-06(2013)..

Historická
1.5.2013

ASTM B955/B955M-11..

Historická
1.5.2011

ASTM B969/B969M-11..

Historická
1.5.2011

ASTM B985-12

Historická
1.12.2012

ASTM D6208-07(2014)..

Historická
1.2.2014

ASTM E1976-11

Historická
1.9.2011

Odebírejte informace o nově vydaných normách ZDARMA:

Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.