Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM B187/B187M-19 15.4.2019 náhled

Doplňující informace

ASTM B187/B187M-19

Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes

Přeložit název

NORMA vydána dne 15.4.2019

Jazyk
Provedení	PDF - okamžité stažení - 1 863.40 Kč Tištěné - 1 863.40 Kč
Dostupnost	SKLADEM
Cena	1863.40 Kč bez DPH
1 863.40 Kč

Informace o normě:

Označení normy: ASTM B187/B187M-19
Poznámka: NEPLATNÁ
Datum vydání normy: 15.4.2019
Kód zboží: NS-949481
Počet stran: 9
Přibližná hmotnost: 27 g (0.06 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Výrobky z mědi
Vodivé materiály

Anotace textu normy ASTM B187/B187M-19 :

Keywords:

bar, bus bar, copper, electrical conductors, embrittlement test, rod, shapes, UNS No. C10100, UNS No. C10200, UNS No. C10300, UNS No. C10400, UNS No. C10500, UNS No. C10700, UNS No. C10920, UNS No. C10930, UNS No. C10940, UNS No. C11000, UNS No. C11300, UNS No. C11400, UNS No. C11500, UNS No. C11600, UNS No. C10800, UNS No. C12000, UNS No. C12200,, ICS Number Code 29.050 (Superconductivity and conducting materials), 77.150.30 (Copper products)

Doplňující informace

1. Scope

1.1 This specification2 establishes the requirements for copper conductor bar, rod, and shapes for electrical (bus) applications and rod, bar, and shapes for general applications.

1.1.1 The products for electrical (bus) applications shall be made from the following coppers:3

Copper UNS No.3

Reference Designation

C10100

OFE

C10200

C10300

OFXLP

C10400, C10500, C10700

OFS

C10920, C10930, C10940

—

C11000

ETP

C11300, C11400, C11500, C11600

STP

C12000

DLP

1.1.1.1 The product may be furnished from any copper listed unless otherwise specified in the contract or purchase order.

1.2 The product for general applications shall be made from any of the coppers in 1.1.1 or the following coppers:

Copper UNS No.3

Reference Designation

C10800

OFLP

C12200

DHP

1.2.1 The product may be furnished from any copper listed above unless otherwise specified in the contract or purchase order. Other coppers may be used upon agreement between the supplier and purchaser.

1.3 Units—The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.

Note 1: Material for hot forging will be found in Specification B124/B124M.

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

B170-99(2020)	Standard Specification for Oxygen-Free Electrolytic Copper´Refinery Shapes
B124/B124M-20	Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
B900-16(2022)	Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
B846-19a	Standard Terminology for Copper and Copper Alloys (Includes all amendments and changes 8/8/2019).
B601-18a	Standard Classification for Temper Designations for Copper and Copper Alloys´Wrought and Cast (Includes all amendments and changes 10/24/2018).
B577-19	Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
E53-07	Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
B249/B249M-23	Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
B216-22	Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
B224-16(2022)	Standard Classification of Coppers
E478-08(2017)	Standard Test Methods for Chemical Analysis of Copper Alloys
E527-23	Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
E2575-19	Standard Test Method for Determination of Oxygen in Copper and Copper Alloys by Inert Gas Fusion
E255-23	Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
E1004-23	Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method
E62-89(1996)	Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
B193-20	Standard Test Method for Resistivity of Electrical Conductor Materials

Doporučujeme:

Aktualizace technických norem

Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.

Chcete vědět více informací? Podívejte se na tuto stránku.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.