Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Pearlitic Malleable Iron
Automaticky přeložený název:
Standardní specifikace pro Perlitový temperované litiny
NORMA vydána dne 1.4.2014
Označení normy: ASTM A220/A220M-99(2014)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.4.2014
Kód zboží: NS-1640
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
casting, malleable iron, mechanical properties, pearlitic, tensile strength, tension test, yield strength, ICS Number Code 77.140.80 (Iron and steel castings)
1. Scope | ||||||||||||||||
1.1 This specification covers pearlitic malleable iron castings for general engineering usage at temperatures from normal ambient to approximately 750°F [400°C]. 1.1.1 For continuous service at temperatures up to 1200°F [650°C] design factors should be incorporated to compensate for possible property changes, as demonstrated by Marshall and Sommer2 and by Pearson.1.2 Without knowledge of casting geometry and process details, no quantitative relationship can be stated between the properties of the iron in the various locations of a casting and those of a test bar cast from the same iron. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. |
||||||||||||||||
2. Referenced Documents | ||||||||||||||||
|
Historická
1.10.2011
Historická
1.10.2010
Historická
1.4.2014
Historická
1.4.2014
Historická
1.10.2012
Historická
1.3.2014
Poslední aktualizace: 07.05.2024 (Počet položek: 2 897 585)
© Copyright 2024 NORMSERVIS s.r.o.