Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
DIN - je chráněné označení německých národních technických norem.
Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry.
NEPLATNÁ vydána dne 1.2.1977
Vybrané provedení:Tolerances for linear measure and angular dimensions of wood and derived timber products for exchangeability.
NEPLATNÁ vydána dne 1.11.1979
Vybrané provedení:Tolerance system for wood working and wood processing; concepts, series of tolerances, shrinkage and swelling.
NEPLATNÁ vydána dne 1.12.1984
Vybrané provedení:Tolerance system for wood working and wood processing - Concepts, series of tolerances, shrinkage and swelling.
NEPLATNÁ vydána dne 1.9.2008
Vybrané provedení:Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture parallel to the grain of solid wood, radial and tangential to the grain of spruce, fir, larch, pine and oregon-pine.
NEPLATNÁ vydána dne 1.6.1978
Vybrané provedení:Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture radial and tangential to the grain of afrormosia, afzelia, ekki, beech, oak, ash, iroko, khaya (african mahagony), macore and yellow meranti.
NEPLATNÁ vydána dne 1.6.1978
Vybrané provedení:Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture, radial and tangential to the grain of red-meranti, muhuhu, niangon, walnut, aspen (poplar), utile, teak, elm and wenge (panga panga).
NEPLATNÁ vydána dne 1.6.1978
Vybrané provedení:Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture in the direction of thickness, width and length of particle-board, plywood and fibreboard.
NEPLATNÁ vydána dne 1.6.1978
Vybrané provedení:Basic deviations and tolerance zones for wood and derived timer products.
NEPLATNÁ vydána dne 1.6.1981
Vybrané provedení:Fundamental deviations and tolerance zones for wood working and wood processing.
NEPLATNÁ vydána dne 1.12.1984
Vybrané provedení:Poslední aktualizace: 21.07.2024 (Počet položek: 2 338 123)
© Copyright 2024 NORMSERVIS s.r.o.