ISO - Mezinárodní organizace pro standardizaci - strana 1994

Normy ISO - Mezinárodní organizace pro standardizaci - strana 1994

ISO (International Organization for Standardization - Mezinárodní organizace pro standardizaci) je největším světovým tvůrcem dobrovolných mezinárodních norem. Mezinárodní normy uvádějí současné specifikace produktů, služeb a osvědčených metod, čímž napomáhají zefektivnění průmyslu. Díky tomu, že jsou vytvářeny na základě mezinárodní shody, napomáhají při překonávání překážek v mezinárodním obchodu.

Zobrazení ceny: bez DPH
Zobrazovaná měna:
Řadit dle:

Upřesnit výběr pro "Normy ISO - strana 1994" dle:    


ISO 4426:2021

Intelligent transport systems — Lower layer protocols for usage in the European digital tachograph
(Systemes de transport intelligents - Protocoles de couche basse pour utilisation dans le cadre du chrono tachygraphe numérique européen)

Norma vydána dne 3.8.2021

Vybrané provedení:

Zobrazit všechny technické informace
6 445.10


SKLADEM
ISO 4427-1:2019-ed.2.0

Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 1: General
(Systemes de canalisations en plastique destinés a l´alimentation en eau et aux branchements et collecteurs d´assainissement sous pression — Polyéthylene (PE) — Partie 1: Généralités)

Norma vydána dne 6.8.2019

Vybrané provedení:

Zobrazit všechny technické informace
3 159.40


SKLADEM
ISO 4427-2:2019-ed.2.0

Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes
(Systemes de canalisations en plastique destinés a l´alimentation en eau et aux branchements et collecteurs d´assainissement sous pression — Polyéthylene (PE) — Partie 2: Tubes)

Norma vydána dne 6.8.2019

Vybrané provedení:

Zobrazit všechny technické informace
4 265.10


SKLADEM
ISO 4427-2:2019-ed.2.0/Amd1:2023 Změna

Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes — Amendment 1
(Systemes de canalisations en plastique destinés a l´alimentation en eau et aux branchements et collecteurs d´assainissement sous pression — Polyéthylene (PE) — Partie 2: Tubes — Amendement 1)

Změna vydána dne 20.2.2023

Vybrané provedení:

Zobrazit všechny technické informace
568.70


SKLADEM
ISO 4427-3:2019-ed.2.0

Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 3: Fittings
(Systemes de canalisations en plastique destinés a l´alimentation en eau et aux branchements et collecteurs d´assainissement sous pression — Polyéthylene (PE) — Partie 3: Raccords)

Norma vydána dne 6.8.2019

Vybrané provedení:

Zobrazit všechny technické informace
5 023.40


SKLADEM
ISO 4427-5:2019-ed.2.0

Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 5: Fitness for purpose of the system
(Systemes de canalisations en plastique destinés a l´alimentation en eau et aux branchements et collecteurs d´assainissement sous pression — Polyéthylene (PE) — Partie 5: Aptitude a l´emploi du systeme)

Norma vydána dne 6.8.2019

Vybrané provedení:

Zobrazit všechny technické informace
2 116.80


SKLADEM
ISO 4433-1:1997

Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 1: Immersion test method
(Tubes en matieres thermoplastiques — Résistance aux liquides chimiques — Classification — Partie 1: Méthode d´essai d´immersion)

Norma vydána dne 18.12.1997

Vybrané provedení:

Zobrazit všechny technické informace
3 159.40


SKLADEM
ISO 4433-2:1997

Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 2: Polyolefin pipes
(Tubes en matieres thermoplastiques — Résistance aux liquides chimiques — Classification — Partie 2: Tubes en polyoléfines)

Norma vydána dne 18.12.1997

Vybrané provedení:

Zobrazit všechny technické informace
3 159.40


SKLADEM
ISO 4433-3:1997

Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 3: Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly (vinyl chloride) (PVC-HI) and chlorinated poly (vinyl chloride) (PVC-C) pipes
(Tubes en matieres thermoplastiques — Résistance aux liquides chimiques — Classification — Partie 3: Tubes en poly(chlorure de vinyle) non plastifié (PVC-U), poly (chlorure de vinyle) a résistance au choc améliorée (PVC-choc) et poly (chlorure de vinyle) chloré (PVC-C))

Norma vydána dne 18.12.1997

Vybrané provedení:

Zobrazit všechny technické informace
2 116.80


SKLADEM
ISO 4433-4:1997

Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 4: Poly(vinylidene fluoride) (PVDF) pipes
(Tubes en matieres thermoplastiques — Résistance aux liquides chimiques — Classification — Partie 4: Tubes en poly(fluorure de vinylidene) (PVDF))

Norma vydána dne 18.12.1997

Vybrané provedení:

Zobrazit všechny technické informace
2 116.80


SKLADEM

Zobrazen záznam od 19930 až 19940 z celkem 26160 záznamů.


Potřebujete pomoci?


Cookies Cookies

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.

Souhlas můžete odmítnout zde.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.