Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Specification for bars and extruded sections of magnesium-11% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (not exceeding 50 mm diameter or minor sectional dimension) (Zn 1.25, Zr 0.6).
NEPLATNÁ vydána dne 15.3.1973
Vybrané provedení:Specification for tube of magnesium-11% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (Zn 1.25, Zr 0.6).
NEPLATNÁ vydána dne 15.3.1973
Vybrané provedení:Aluminium-copper-magnesium-silicon-manganese alloy tubes (solution treated and aged at room temperature).
NEPLATNÁ vydána dne 1.1.1961
Vybrané provedení:Specification for sheet and strip of aluminium-21% magnesium alloy (three-quarter hard-H6).
NEPLATNÁ vydána dne 30.3.1973
Vybrané provedení:Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-nickel-magnesium-iron-silicon alloy (solution treated and precipitation treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe 0.9).
NEPLATNÁ vydána dne 31.8.1971
Vybrané provedení:Specification for bars and extruded sections of aluminium-copper-silicon-magnesium alloy (solution treated and aged at room temperature) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 1.5, Si 1, Mg 0.8).
NEPLATNÁ vydána dne 31.8.1971
Vybrané provedení:Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-silicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5, Si 1, Mg 0.8).
NEPLATNÁ vydána dne 31.8.1971
Vybrané provedení:Aluminum-copper-magnesium alloy wires for solid, cold forged rivets (not exceeding 3/8 inch diameter).
NEPLATNÁ vydána dne 1.1.1967
Vybrané provedení:Specification for hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (free from peripheral and asymmetric coarse grain) (not less than 14 mm nor more than 36 mm across flats) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8).
NEPLATNÁ vydána dne 31.8.1971
Vybrané provedení:Specification for aluminium-alloy-coated sheet and strip of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15).
NEPLATNÁ vydána dne 31.8.1971
Vybrané provedení:Poslední aktualizace: 10.07.2026 (Počet položek: 2 286 359)
© Copyright 2026 NORMSERVIS s.r.o.