Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Trace Metals in Oils by Wet Ashing and ICP-OES
Automaticky přeložený název:
Stopových prvků v olejích mokrou zpopelnění a ICP - OES
NORMA vydána dne 10.11.2004
Označení normy: UOP 389-04
Poznámka: NEPLATNÁ
Datum vydání normy: 10.11.2004
Kód zboží: NS-574757
Počet stran: 9
Přibližná hmotnost: 27 g (0.06 liber)
Země: Americká technická norma
Kategorie: Technické normy UOP
1. Scope |
This method is for determining iron (Fe), nickel (Ni), vanadium (V), lead (Pb), copper (Cu), sodium (Na), molybdenum (Mo), manganese (Mn), chromium (Cr), magnesium (Mg), tin (Sn), calcium (Ca), aluminum (Al) and zinc (Zn) in crude petroleum, oils, jet fuels, gas oils, asphalts, and polymers. Most of the elements can be determined within the concentration range of 0.02 to 200 mass-ppm when a 50-g sample of oil is ashed. Higher or lower concentrations can be determined by ashing appropriate-sized samples and/or modifying the instrument operating parameters. Determination of additional elements is possible if they are not volatilized during the ashing step and do not form insoluble sulfates. |
Poslední aktualizace: 16.03.2025 (Počet položek: 2 232 382)
© Copyright 2025 NORMSERVIS s.r.o.