Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Impurities in Catalysts by ICP-OES
Automaticky přeložený název:
Nečistoty v katalyzátorů ICP - OES
NORMA vydána dne 26.7.2002
Označení normy: UOP 303-05
Poznámka: NEPLATNÁ
Datum vydání normy: 26.7.2002
Kód zboží: NS-574720
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy UOP
1. Scope |
This method is for determining trace metal elements in fresh, regenerated and spent alumina-, silica- or silica/alumina-based catalysts by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP-AES). Fe, Ni, V, Ca, Mg, Mn, Cr, Sn, Cu, Zn, Ti, Pb, Na, Mo, Co and Si are determined quantitatively on catalysts. Si is not determined when it is a component of the catalyst base. Other elements can be added if required, however, Ba and Hg cannot be determined. In addition, As and P are determined on regenerated or spent alumina-based catalyst. The majority of the specified elements can be determined within the concentration range of 0.005 to 2.0 mass-%. Specific concentration ranges for the elements determined are listed in Table 1. This method is not applicable to noble metals and modifiers on catalysts. Those elements can be determined by UOP Method 873. This method cannot be used for determining impurities in alpha-alumina catalyst. |
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 16.03.2025 (Počet položek: 2 232 382)
© Copyright 2025 NORMSERVIS s.r.o.