Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Hydraulic Valves for Motor Vehicle Brake Systems Test Procedure
Přeložit název
NORMA vydána dne 1.12.2012
Označení normy: SAE J1118
Datum vydání normy: 1.12.2012
Kód zboží: NS-662316
Země: Americká technická norma
Kategorie: Technické normy SAE
The SAE Recommended Practice specifies the test procedure to assure valve assemblies which are satisfactory for vehicle usage, and it is applicable to new valve assemblies for commercial production. It covers such valves where they are employed in passenger car and light truck brake systems utilizing motor vehicle hydraulic brake fluids. This procedure and requirements (SAE J1137) was developed for brake fluids conforming to SAE J1703 and FMVSS 116 (DOT 3); however, it may be utilized for valves which use DOT 4 or DOT 5 brake fluid.
These procedure specifications were developed for base brake operation and do not consider the effects of ABS (anti-lock brake systems) or traction control systems which may have a significant effect on the valve. Careful analysis of the particular type ABS and/or traction control (if included in the system) should be made and additional tests are required which are not included in this document. Provisions for ABS and traction control will be incorporated in a future revision or covered in a separate document.
The minimum performance requirements are specified in SAE J1137.
SUBJECT TAXONOMY: Chassis, Braking systems, Maintainability and supportability, Liability, Valves, Hydraulic systems, Tests and Testing
SUBFILE: Automotive
TYPE OF DOCUMENT: Ground Vehicle Standard
Stabilized: Dec 2012 
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 17.05.2026 (Počet položek: 2 278 942)
© Copyright 2026 NORMSERVIS s.r.o.