Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Telecommunications and exchange between information technology systems - Requirements for local and metropolitan area networks - Part 3: Standard for Ethernet
Přeložit název
NORMA vydána dne 23.2.2021
Označení normy: ISO/IEC/IEEE 8802-3-ed.3.0
Datum vydání normy: 23.2.2021
Kód zboží: NS-1020030
Počet stran: 5139
Přibližná hmotnost: 15448 g (34.06 liber)
Země: Mezinárodní technická norma
Kategorie: Technické normy ISO
This document defines Ethernet local area, access and metropolitan area networks. Ethernet is specified at selected speeds of operation; and uses a common media access control (MAC) specification and management information base (MIB). The Carrier Sense Multiple Access with Collision Detection (CSMA/CD) MAC protocol specifies shared medium (half duplex) operation, as well as full duplex operation. Speed specific Media Independent Interfaces (MIIs) provide an architectural and optional implementation interface to selected Physical Layer entities (PHY). The Physical Layer encodes frames for transmission and decodes received frames with the modulation specified for the speed of operation, transmission medium and supported link length. Other specified capabilities include: control and management protocols, and the provision of power over selected twisted pair PHY types.
Telecommunications and information exchange between systems - Specific requirements for local and metropolitan area networks - Part 3: Standard for Ethernet - Amendment 1: Physical layer specifications and management parameters for 2.5 Gb/s and 5 Gb/s operation over backplane
Změna vydána dne 23.12.2021
Vybrané provedení:Telecommunications and exchange between information technology systems - Requirements for local and metropolitan area networks - Part 3: Standard for Ethernet - Amendment 10: Maintenance #14: Isolation
Změna vydána dne 8.7.2022
Vybrané provedení:Telecommunications and exchange between information technology systems - Requirements for local and metropolitan area networks - Part 3: Standard for Ethernet - Amendment 11: Physical layers and management parameters for 100 Gb/s and 400 Gb/s operation over single-mode fiber at 100 Gb/s per wavelength
Změna vydána dne 8.7.2022
Vybrané provedení:Telecommunications and exchange between information technology systems - Requirements for local and metropolitan area networks - Part 3: Standard for Ethernet - Amendment 12: Maintenance #15: Power over Ethernet
Změna vydána dne 17.10.2022
Vybrané provedení:Telecommunications and exchange between information technology systems - Requirements for local and metropolitan area networks - Part 3: Standard for Ethernet - Amendment 13: Physical layers and management parameters for 100 Gb/s operation over DWDM systems
Změna vydána dne 17.10.2022
Vybrané provedení:Telecommunications and exchange between information technology systems - Requirements for local and metropolitan area networks - Part 3: Standard for Ethernet - Amendment 14: Bidirectional 10 Gb/s, 25 Gb/s, and 50 Gb/s optical access PHYs
Změna vydána dne 17.10.2022
Vybrané provedení:Telecommunications and exchange between information technology systems - Requirements for local and metropolitan area networks - Part 3: Standard for Ethernet - Amendment 2: Physical layer and management parameters for power over Ethernet over 4 pairs
Změna vydána dne 23.12.2021
Vybrané provedení:Telecommunications and exchange between information technology systems - Requirements for local and metropolitan area networks - Part 3: Standard for Ethernet - Amendment 3: Media access control parameters for 50 Gb/s and physical layers and management parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s operation
Změna vydána dne 23.12.2021
Vybrané provedení:Telecommunications and exchange between information technology systems - Requirements for local and metropolitan area networks - Part 3: Standard for Ethernet - Amendment 4: Physical layers and management parameters for 50 Gb/s, 200 Gb/s, and 400 Gb/s operation over single-mode fiber
Změna vydána dne 29.10.2021
Vybrané provedení:Telecommunications and exchange between information technology systems - Requirements for local and metropolitan area networks - Part 3: Standard for Ethernet - Amendment 5: Physical layers specifications and management parameters for 10 Mb/s operation and associated power delivery over a single balanced pair of conductors
Změna vydána dne 15.12.2021
Vybrané provedení:Telecommunications and exchange between information technology systems - Requirements for local and metropolitan area networks - Part 3: Standard for Ethernet - Amendment 6: Maintenance #13: Power over ethernet over 2 pairs
Změna vydána dne 29.10.2021
Vybrané provedení:Telecommunications and exchange between information technology systems - Requirements for local and metropolitan area networks - Part 3: Standard for Ethernet - Amendment 7: Physical layer and management parameters for 400 Gb/s over multimode fiber
Změna vydána dne 29.10.2021
Vybrané provedení:Telecommunications and exchange between information technology systems - Requirements for local and metropolitan area networks - Part 3: Standard for Ethernet - Amendment 8: Physical layer specifications and management parameters for 2.5 Gb/s, 5 Gb/s, and 10 Gb/s automotive electrical ethernet
Změna vydána dne 29.10.2021
Vybrané provedení:Telecommunications and exchange between information technology systems - Requirements for local and metropolitan area networks - Part 3: Standard for Ethernet - Amendment 9: Physical layer specifications and management parameters for 25 Gb/s and 50 Gb/s passive optical networks
Změna vydána dne 15.12.2021
Vybrané provedení:Poslední aktualizace: 25.06.2025 (Počet položek: 2 205 871)
© Copyright 2025 NORMSERVIS s.r.o.