Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Heavy duty engines — Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
Automaticky přeložený název:
Těžké motory - Měření plynných emisí ze surového výfukového plynu a emisí částic s použitím ředěním části toku za přechodných podmínek zkoušky
NORMA vydána dne 9.12.2002
Označení normy: ISO 16183:2002
Datum vydání normy: 9.12.2002
Kód zboží: NS-426936
Počet stran: 64
Přibližná hmotnost: 192 g (0.42 liber)
Země: Mezinárodní technická norma
Kategorie: Technické normy ISO
Výfukové emise z dopravních prostředků
Přetlakové plnění a sací a výfukové potrubí
Description / Abstract: ISO 16183 specifies methods for the measurement and evaluation of gaseous and particulate exhaust emissions from heavy-duty engines under transient conditions on a test bed. The procedures it defines can be applied to any transient test cycle that does not require extreme system response times; it can therefore be used as an option to the regulated measurement equipment (usually CVS-type systems) of certification test cycles (e.g. ETC and FTP), with the approval of the certification agency. ISO 16183 is applicable to heavy-duty engines for commercial vehicles primarily designed for road use, but can also be applied to passenger car engines and to engines used for non-road applications. The test equipment specified can also be applied to steady-state test cycles, however, if so, the calculation procedures will need to be replaced by those applicable to the particular test cycle.
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 17.12.2025 (Počet položek: 2 252 317)
© Copyright 2025 NORMSERVIS s.r.o.