Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests
Automaticky přeložený název:
Motocykly - Testování a analýza postupy pro hodnocení výzkumu jezdce srážky ochranných zařízení namontovaných na motocykly - Část 7: standardizované postupy pro provádění počítačových simulací nárazových zkoušek motocyklových
NORMA vydána dne 8.12.2005
Označení normy: ISO 13232-7:2005-ed.2.0
Datum vydání normy: 8.12.2005
Kód zboží: NS-424501
Počet stran: 27
Přibližná hmotnost: 81 g (0.18 liber)
Země: Mezinárodní technická norma
Kategorie: Technické normy ISO
Description / Abstract: The purposes of ISO 13232-7:2005 are to provide: conventions for calibrating and documenting the important features of the simulation models;guidelines for definition and use of mathematical models for motorcycle impact simulations, which can be correlated against data for full-scale tests;a means for identifying possible additional impact conditions for full-scale testing; anda standardized tool, of optional use, for risk/benefit analysis of rider crash protective devices fitted to motorcycles, based upon the population of impact conditions identified in ISO 13232-2. ISO 13232 specifies the minimum requirements for research into the feasibility of protective devices fitted to motorcycles, which are intended to protect the rider in the event of a collision. ISO 13232 is applicable to impact tests involving: two-wheeled motorcycles;the specified type of opposing vehicle;either a stationary and a moving vehicle or two moving vehicles;for any moving vehicle, a steady speed and straight-line motion immediately prior to impact;one helmeted dummy in a normal seating position on an upright motorcycle;the measurement of the potential for specified types of injury by body region; andevaluation of the results of paired impact tests (i.e. comparisons between motorcycles fitted and not fitted with the proposed devices). ISO 13232 does not apply to testing for regulatory or legislative purposes.
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests — Amendment 1: Ground impact
(Motocycles — Méthodes d´essai et d´analyse de l´évaluation par la recherche des dispositifs, montés sur les motocycles, visant a la protection des motocyclistes contre les collisions — Partie 7: Méthodes normalisées de simulation par ordinateur d´essais de choc sur motocycles — Amendement 1: Impact au sol)
Změna vydána dne 12.7.2012
Vybrané provedení:
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests — Amendment 2: Correlation factors
(Motocycles — Méthodes d´essai et d´analyse de l´évaluation par la recherche des dispositifs, montés sur les motocycles, visant a la protection des motocyclistes contre les collisions — Partie 7: Méthodes normalisées de simulation par ordinateur d´essais de choc sur motocycles — Amendement 2: Facteurs de corrélation)
Změna vydána dne 25.5.2023
Vybrané provedení:20.9.2012
21.1.2011
9.2.2010
1.11.1990
25.10.1990
1.11.1990
Poslední aktualizace: 26.01.2026 (Počet položek: 2 257 479)
© Copyright 2026 NORMSERVIS s.r.o.