ISO 10333-3:2000..
ISO 10333-4:2002..
ISO 10333-6:2004..
ISO 14567:1999
ISO 16024:2005
ISO 22159:2007
Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ISO 10333-5:2001
Personal fall-arrest systems — Part 5: Connectors with self-closing and self-locking gates
Automaticky přeložený název:
Osobní Záchytný systémy - Část 5: konektory S pružinou a samosvorných brány
NORMA vydána dne 29.11.2001
Informace o normě:
Označení normy: ISO 10333-5:2001
Datum vydání normy: 29.11.2001
Kód zboží: NS-421894
Počet stran: 11
Přibližná hmotnost: 33 g (0.07 liber)
Země: Mezinárodní technická norma
Kategorie: Technické normy ISO
Kategorie - podobné normy:
Anotace textu normy ISO 10333-5:2001 :
Description / Abstract: This part of ISO 10333 specifies requirements, test methods, instructions for use and maintenance, marking, labelling and packaging, as appropriate, for connectors with self-closing and self-locking gates made from metallic materials. Connectors are used in personal fall-arrest systems (PFAS), which will be specified in a future International Standard (see ISO 10333-6 in the Bibliography), such that, if an arrest takes place, the arresting force will not exceed 6kN.. This part of ISO 10333 is applicable only to connectors limited to single person use of a total mass not exceeding 100kg. . NOTE Users of fall protection equipment whose total mass (including tools and equipment) exceeds 100 kg are advised to seek advice from the equipment manufacturer regarding the suitability of this equipment, which may need additional testing. The scope of this part of ISO 10333 does not extend to: a) attachment elements, fastening buckles, adjusting buckles and other metallic fittings used in the manufacture of full-body harnesses, which are specified in ISO 10333-6; b) connectors used for material-lifting purposes; c) connectors used in special techniques or situations, e.g. rescue, or rope access. This part of ISO 10333 does not specify those additional requirements that would apply when connectors are subjected to special conditions of use (where, for example, there exist unusual limitations concerning access to the place of work and/or particular environmental factors). Thus, treatments to ensure the durability of the materials of construction (such as heat treatment, anti-corrosion treatment, protection against physical and chemical hazards) are not specified in this part of ISO 10333, but should comply with appropriate International Standards or, failing that, with national standards and other specifications dealing with relevant physical characteristics and/or the safety of users. In particular, when it is considered necessary to test the corrosion resistance of metallic parts of the equipment, reference should be made to ISO 9227.
Podobné normy:
27.4.2000
2.5.2002
12.1.2004
11.3.1999
25.10.2005
15.5.2007
Doporučujeme:
Aktualizace technických norem
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
