Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
Automaticky přeložený název:
Palivové články technologie - Část 3-200 : Stacionární buňka Power Systems palivo - zkušební metody Performance
NORMA vydána dne 19.11.2015
Označení normy: IEC 62282-3-200-ed.2.0
Datum vydání normy: 19.11.2015
Kód zboží: NS-621435
Počet stran: 148
Přibližná hmotnost: 475 g (1.05 liber)
Země: Mezinárodní technická norma
Kategorie: Technické normy IEC
IEC 62282-3-200:2015 covers operational and environmental aspects of the stationary fuel cell power systems performance. The test methods apply as follows: - power output under specified operating and transient conditions; - electrical and heat recovery efficiency under specified operating conditions; - environmental characteristics; - for example, exhaust gas emissions, noise, etc. under specified operating and transient conditions. This new edition includes the following significant technical changes with respect to the previous edition: a stabilization zone of +- 10 % for thermal output of 100 % response time is provided instead of the tests for thermal output of 90 % response time, while the tests for electric output of 90 % response time remain as an option; the calculations for the ramp rate in kW/s are deleted and only the calculations for the response time (s) remain. LIEC 62282-3-200:2015 couvre les aspects de fonctionnement et denvironnement des performances des systemes a piles a combustible stationnaires. Les methodes dessai sappliquent comme suit: - puissance de sortie dans des conditions de fonctionnement specifiees y compris les conditions transitoires; - rendements de lenergie electrique et de lenergie thermique recuperable dans des conditions de fonctionnement specifiees; - caracteristiques denvironnement, par exemple, emissions de gaz dechappement, bruit, etc., dans des conditions de fonctionnement specifiees y compris les conditions transitoires. Cette nouvelle edition inclut les modifications techniques majeures suivantes par rapport a ledition precedente: une zone de stabilisation de +- 10 % pour une sortie thermique dun temps de reponse a 100 % est fournie en lieu et place des essais de sortie thermique dun temps de reponse a 90 %, alors que les essais de sortie electrique dun temps de reponse a 90 % restent facultatifs; les calculs relatifs au taux de variation en kW/s sont supprimes et seuls les calculs relatifs au(x) temps de reponse sont maintenus.
Poskytování aktuálních informací o legislativních předpisech vyhlášených ve Sbírce zákonů od roku 1945.
Aktualizace 2x v měsíci !
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 28.09.2024 (Počet položek: 2 350 600)
© Copyright 2024 NORMSERVIS s.r.o.