Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
High-voltage direct current (HVDC) installations - System tests
Automaticky přeložený název:
Stejnosměrný proud (HVDC) instalace vysokého napětí - systém testy
NORMA vydána dne 29.7.2010
Označení normy: IEC 61975-ed.1.0
Datum vydání normy: 29.7.2010
Kód zboží: NS-413981
Počet stran: 165
Přibližná hmotnost: 526 g (1.16 liber)
Země: Mezinárodní technická norma
Kategorie: Technické normy IEC
Vysokonapěťové rozváděče a regulátory
Polovodičová zařízení obecně
IEC 61975:2010 applies to system tests for high-voltage direct current (HVDC) installations which consist of a sending terminal and a receiving terminal, each connected to an a.c. system. The tests specified in this standard are based on bidirectional and bipolar high-voltage direct current (HVDC) installations which consist of a sending terminal and a receiving terminal, each connected to an a.c. system. The test requirements and acceptance criteria should be agreed for back-to-back installations, while multi-terminal systems and voltage sourced converters are not included in this standard. For monopolar HVDC installations, the standard applies except for bipolar tests. This standard only serves as a guideline to system tests for high-voltage direct current (HVDC) installations. The standard gives potential users guidance, regarding how to plan commissioning activities. The tests described in the guide may not be applicable to all projects, but represent a range of possible tests which should be considered. This edition cancels and replaces IEC/PAS 61975 published jointly in 2004 by IEC and CIGRE. It constitutes a technical revision incorporating engineering experience. La CEI 61975:2010 sapplique aux essais systemes pour les installations en courant continu a haute tension (CCHT) qui se composent dune borne demission et dune borne de reception, chacune reliee a un systeme a courant alternatif. Les essais specifies dans la presente norme sont bases sur des installations en courant continu a haute tension (CCHT) bidirectionnelles et bipolaires qui se composent dune borne demission et dune borne de reception, chacune reliee a un systeme a courant alternatif. Il convient que les exigences dessai et les criteres dacceptation soient convenus pour les installations en opposition, alors que les systemes a bornes multiples et les convertisseurs a source de tension ne sont pas inclus dans la presente norme. Pour les installations CCHT monopolaires, la norme sapplique, excepte pour les essais bipolaires. La presente norme sert uniquement de lignes directrices des essais systemes pour les installations en courant continu a haute tension (CCHT). La norme fournit des recommandations aux utilisateurs potentiels quant a la maniere de planifier les activites de mise en service. Les essais decrits dans le guide ne peuvent etre applicables a lensemble des projets, mais representent une partie des essais possibles quil convient de prendre en consideration. Cette premiere version de la CEI 61975 annule et remplace la CEI/PAS 61975 qui a ete publiee conjointement en 2004 par la CEI et le CIGRE, dont elle constitue une revision technique combinee a une experience en ingenierie.
Amendment 1 - High-voltage direct current (HVDC) installations - System tests
(Amendement 1 - Installations en courant continu a haute tension (CCHT) - Essais systemes)
Změna vydána dne 12.9.2016
Vybrané provedení:
Amendment 2 - High-voltage direct current (HVDC) installations - System tests
(Amendement 2 - Installations en courant continu a haute tension (CCHT) - Essais systemes)
Změna vydána dne 24.10.2022
Vybrané provedení:
Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 04.08.2025 (Počet položek: 2 211 733)
© Copyright 2025 NORMSERVIS s.r.o.