Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Electrical installations for lighting and beaconing of aerodromes - AGL series transformers
Automaticky přeložený název:
Elektrická zařízení pro osvětlení letištních ploch a signalizaci - AGL řady transformátory
NORMA vydána dne 13.12.2002
Označení normy: IEC 61823-ed.1.0
Datum vydání normy: 13.12.2002
Kód zboží: NS-413780
Počet stran: 22
Přibližná hmotnost: 66 g (0.15 liber)
Země: Mezinárodní technická norma
Kategorie: Technické normy IEC
IEC 61823:2002 specifies the characteristics of aeronautical ground lighting series trans-formers (AGLST) used in aeronautical ground lighting for 6,6 A series circuits, at a service voltage of up to 5 kV, supplied by constant current regulators up to 30 kVA in rating. AGL series transformers provide power to airport lighting luminaires or other loads (resistive) from their secondary circuits. The AGL series transformers provide continuity of the series circuit in the event of a loss of the load on the transformer, and electrical isolation between the primary circuit supplied by a constant current regulator, and the secondary circuit connected to the load under conditions defined in this standard. This bilingual version (2016-11) corresponds to the English version, published in 2002-12. LIEC 61823:2002 specifie les caracteristiques des transformateurs serie utilises pour le balisage aeronautique au sol (AGLST) pour des circuits serie de 6,6 A, dont la tension de service atteint 5 kV, alimentes par des regulateurs de courant constant jusqua 30 kVA. Les transformateurs serie AGL assurent lalimentation des feux aeronautiques de balisage ou dautres charges (resistives) a partir de leurs circuits secondaires. Les transformateurs serie AGL assurent la continuite du circuit serie en cas de perte de charge sur le transformateur, et lisolation electrique entre le circuit primaire alimente par un regulateur de courant constant et le circuit secondaire connecte a la charge dans des conditions definies dans la presente Norme. La presente version bilingue (2016-11) correspond a la version anglaise monolingue publiee en 2002-12.
Poslední aktualizace: 24.08.2025 (Počet položek: 2 213 294)
© Copyright 2025 NORMSERVIS s.r.o.