ČSN ETSI EN 300330-2-V1.6.1 (875026)

Kategorie - podobné normy:

Přijímací a vysílací radiokomunikační zařízení
Ostatní zařízení pro radiokomunikace
Elektromagnetická kompatibilita všeobecně
Elektromagnetické emise

Anotace textu normy ČSN ETSI EN 300330-2-V1.6.1 (875026):

V1.6.1

The present document applies to Short Range Devices (SRDs) transmitters and receivers as described in the scope of ETSI EN 300 330-1 [1].

The present document covers transmitters intended to operate in the frequency range as defined in the Commission Decision 2006/771/EC [i.4] on harmonization of the radio spectrum for use by short-range devices as amended by Commission Decision 2013/752/EU of 11 December 2013 [i.6] and the CEPT/ERC/REC 70-03 [i.5].

The document applies to:

• 1) Generic Short range Devices including transmitters operating in the range from 9 kHz to 25 MHz; and
• 2) inductive loop transmitters operating from 9 kHz to 30 MHz including Radio Frequency Identification (RFID) and EAS equipments operating in LF and HF ranges and for radio equipment including wireless power transfer (WPT) function in the same frequency range;
• 3) receivers of systems as defined by bullets 1 and 2;

4) these radio equipment types are capable of operating in the permitted frequency bands within the 9 kHz to 30 MHz range as specified in table 1:

• - either with a Radio Frequency (RF) output connection and dedicated antenna or with an integral antenna;
• - for all types of modulation;
• - with or without speech.

The present document covers fixed stations, mobile stations and portable stations.

The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC [i.2] (R&TTE Directive), which states that "... radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference".

In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [i.2] may apply to equipment within the scope of the present document