Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Svařovací materiály - Plněné elektrody pro obloukové svařování vysokopevnostních ocelí v ochranném plynu a bez ochranného plynu - Klasifikace (Norma k přímému použití jako ČSN).
Přeložit název
NORMA vydána dne 1.10.2017
Označení normy: ČSN EN ISO 18276
Třídící znak: 055505
Katalogové číslo: 502866
Datum vydání normy: 1.10.2017
Kód zboží: NS-796824
Počet stran: 36
Přibližná hmotnost: 108 g (0.24 liber)
Země: Česká technická norma
Kategorie: Technické normy ČSN
This document specifies the requirements for classification of tubular cored electrodes with or without a gas shield for metal arc welding of high-strength steels in the as-welded condition or in the post-weld heat-treated condition with a minimum yield strength higher than 550 MPa or a minimum tensile strength higher than 590 MPa. One tubular cored electrode can be tested and classified with different shielding gases, if used with more than one. This document is a combined specification providing classification utilizing a system based upon the yield strength and an average impact energy of 47 J of the all-weld metal, or utilizing a system based upon the tensile strength and an average impact energy of 27 J of the all-weld metal. - Subclauses and tables which carry the suffix letter "A" are applicable only to tubular cored electrodes classified under the system based upon the yield strength and an average impact energy of 47 J of the all-weld metal given in this document. - Subclauses and tables which carry the suffix letter "B" are applicable only to tubular cored electrodes classified under the system based upon the tensile strength and an average impact energy of 27 J of the all-weld metal given in this document. - Subclauses and tables which do not have either the suffix letter "A" or the suffix letter "B" are applicable to all tubular cored electrodes classified under this document. It is recognized that the operating characteristics of tubular cored electrodes can be modified by the use of pulsed current but, for the purposes of this document, pulsed current is not used for determining the electrode classification
Poslední aktualizace: 17.04.2024 (Počet položek: 2 859 866)
© Copyright 2024 NORMSERVIS s.r.o.