Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ČSN EN ISO 11704 (757608)
Kvalita vod - Měření celkové objemové aktivity alfa a celkové objemové aktivity beta - Kapalinová scintilační měřicí metoda (Norma k přímému použití jako ČSN).
Přeložit název
NORMA vydána dne 1.8.2019
Informace o normě:
Označení normy: ČSN EN ISO 11704
Třídící znak: 757608
Katalogové číslo: 507433
Datum vydání normy: 1.8.2019
Kód zboží: NS-955239
Počet stran: 32
Přibližná hmotnost: 96 g (0.21 liber)
Země: Česká technická norma
Kategorie: Technické normy ČSN
Kategorie - podobné normy:
Anotace textu normy ČSN EN ISO 11704 (757608):
This document specifies a method for the determination of gross alpha and gross beta activity concentration for alpha- and beta-emitting radionuclides using liquid scintillation counting (LSC). The method is applicable to all types of waters with a dry residue of less than 5 g/l and when no correction for colour quenching is necessary. Gross alpha and gross beta activity measurement is not intended to give an absolute determination of the activity concentration of all alpha- and beta-emitting radionuclides in a test sample, but is a screening analysis to ensure particular reference levels of specific alpha and beta emitters have not been exceeded. This type of determination is also known as gross alpha and beta index. Gross alpha and beta analysis is not expected to be as accurate nor as precise as specific radionuclide analysis after radiochemical separations. The method covers non-volatile radionuclides below 80 °C, since some gaseous or volatile radionuclides (e.g. radon and radioiodine) can be lost during the source preparation. The method is applicable to test samples of drinking water, rain water, surface and ground water as well as cooling water, industrial water, domestic and industrial waste water after proper sampling and test sample preparation (filtration when necessary and taking into account the amount of dissolved material in the water). The method described in this document is applicable in the event of an emergency situation, because the results can be obtained in less than 4 h by directly measuring water test samples without any treatment. It is the laboratory´s responsibility to ensure the suitability of this test method for the water samples tested
Náhled normy ČSN EN ISO 11704 (757608)
Doporučujeme:
