Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Bezpečnost dřevozpracujících strojů - Kotoučové pily - Část 3: Horní kotoučové pily pro příčné řezání a kombinované horní kotoučové pily pro příčné řezání/stolové kotoučové pily (Norma k přímému použití jako ČSN).
NORMA vydána dne 1.7.2015
Označení normy: ČSN EN 1870-3
Třídící znak: 496130
Katalogové číslo: 97007
Datum vydání normy: 1.7.2015
Kód zboží: NS-609404
Počet stran: 68
Přibližná hmotnost: 204 g (0.45 liber)
Země: Česká technická norma
Kategorie: Technické normy ČSN
This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches, herein after referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic edging and/or plastic/light alloy laminates when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. NOTE 1 - For the definition of down cutting cross-cut saws and dual purpose down cutting cross -cut saws/circular saw benches, see 3.2.2, 3.2.3 and 3.2.4, and for the definition of displaceable machine, see 3.2.8. This document does not apply to: - machines for cross cutting logs; - hand-held motor-operated electric tools or any adaptation permitting their use in a different mode, e.g. bench mounting; NOTE 2 - Hand-held motor-operated electric tools and saw benches to form an integrated whole with a hand-held motor-operated electric tools are covered by EN 60745-1:2009 together with EN 60745-2-5:2010. - transportable machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand i.e. maximum mass <= 25 kg. NOTE 3 - Transportable motor-operated electric tools are covered by the requirements of EN 61029-1:2009 together with EN 61029-2-9:2009 and EN 61029-2-11:2009. This document is not applicable to down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches which are manufactured before the date of its publication as European Standard
Poslední aktualizace: 26.07.2024 (Počet položek: 2 339 085)
© Copyright 2024 NORMSERVIS s.r.o.