Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Guide for Studying Fire Incidents in Oxygen Systems
Přeložit název
NORMA vydána dne 1.10.2016
Označení normy: ASTM G145-08(2016)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2016
Kód zboží: NS-666133
Počet stran: 11
Přibližná hmotnost: 33 g (0.07 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
accident, cause, fire, incident, investigation, oxygen ,, ICS Number Code 13.220.99 (Other standards related to fire protection)
Significance and Use | ||||||||||||||||||||||||||||||||||||||||||||
5.1 This guide helps those studying oxygen system incidents to select a direct cause hypothesis and to avoid conclusions based on hypotheses, however plausible, that have proven faulty in the past. |
||||||||||||||||||||||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||||||||||||||||||||||
1.1 This guide covers procedures and material for examining fires in oxygen systems for the purposes of identifying potential causes and preventing recurrence. 1.2 This guide is not comprehensive. The analysis of oxygen fire incidents is not a science, and definitive causes have not been established for some events. 1.3 The procedures and analyses in this guide have been found to be useful for interpreting fire events, for helping identify potential causes, and for excluding other potential causes. The inclusion or omission of any analytical strategy is not intended to suggest either applicability or inapplicability of that method in any actual incident study. Note 1: Although this guide has been found applicable for
assisting qualified technical personnel to analyze incidents, each
incident is unique and must be approached as a unique event.
Therefore, the selection of specific tactics and the sequence of
application of those tactics must be conscious decisions of those
studying the event.
Note 2: The incident may require the formation of a team to
provide the necessary expertise and experience to conduct the
study. The personnel analyzing an incident, or at least one member
of the team, should know the process under study and the equipment
installation.
1.4 Warning—During combustion, gases, vapors, aerosols, fumes, or combinations thereof, are evolved, which may be present and may be hazardous to people. Caution —Adequate precautions should be taken to protect those conducting a study. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||||||||
|
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 21.12.2024 (Počet položek: 2 216 840)
© Copyright 2024 NORMSERVIS s.r.o.