Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
Automaticky přeložený název:
Standardní specifikace pro stlačitelné - Podložka -Type v prostém tahu indikátory pro použití s Spojovací součásti,
NORMA vydána dne 1.5.2015
Označení normy: ASTM F959-15
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2015
Kód zboží: NS-616781
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
compressible-washer-type, direct tension indicators, DTI, indicators,, ICS Number Code 21.060.01 (Fasteners in general)
1. Scope | ||||||||||||||||||||||||||||||||
1.1 This specification covers the requirements for compressible-washer-type direct tension indicators, (DTIs) capable of indicating the achievement of a specified minimum bolt tension in a structural bolt. 1.2 Eight types of DTIs in nominal diameter sizes 1/2 through 11/2 in. as well as M16 through M36 are covered: 1.2.1 Type 325-1—DTIs for use with Specification A325 Type 1 bolts or F or F1852 assemblies. 1.2.2 Type 325–3—DTIs for use with Specification A325 Type 3 bolts or F1852 Type 3 assemblies. 1.2.3 Type 490–1—DTIs for use with Specification A490 Type 1 bolts or F2280 assemblies. 1.2.4 Type 490–3—DTIs for use with Specification A490 Type 3 F2280 Type 3 assemblies. 1.2.5 Type 8.8-1—DTIs for use with Specification A325M Type 1 bolts. 1.2.6 Type 8.8-3—DTIs for use with Specification A325M Type 3 bolts. 1.2.7 Type 10.9-1—DTIs for use with Specification A490M Type 1 bolts. 1.2.8 Type 10.9-3—DTIs for use with Specification A490M Type 3 bolts. 1.3 DTIs are intended for installation under either a bolt head or a hardened washer. (See Research Council on Structural Connections: Specification for Structural Joints Using High–Strength Bolts.) 1.4 This specification provides for furnishing Type 3 DTIs to a Chemical Composition Requirement or a Corrosion Resistance Index (CRI) at the manufacturer’s discretion. 1.5 Terms used in this specification are defined in Terminology F1789 unless otherwise specified. 1.6 The following precautionary statement pertains
only to the test method portions, Section 10 and Appendix X1 of this specification:
Standard Specification for Structural
Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength
(Metric) (Withdrawn 2016) Specification for Structural Joints Using
HighStrength Bolts Standard Guide for Estimating the
Atmospheric Corrosion Resistance of Low-Alloy Steels Standard Specification for “Twist Off”
Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel,
Heat Treated, 150 ksi Minimum Tensile Strength (Withdrawn 2016) Standard Specification for “Twist Off”
Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel,
Heat Treated, 120/105 ksi Minimum Tensile Strength (Withdrawn
2016) Standard Terminology for F16 Mechanical
Fasteners Standard Practice for Fastener Sampling
for Specified Mechanical Properties and Performance Inspection Standard Test Methods for Determining the
Mechanical Properties of Externally and Internally Threaded
Fasteners, Washers, Direct Tension Indicators, and Rivets ASMEB18.2.6 Fasteners for Use in Structural
Applications Standard Specification for Structural
Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile
Strength Standard Specification for Structural
Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
(Withdrawn 2016) Standard Specification for High-Strength
Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints
(Metric) Standard Specification for Coatings of
Zinc Mechanically Deposited on Iron and Steel Standard Specification for Hardened Steel
Washers Standard Specification for Hardened Steel
Washers [Metric] (Withdrawn 2016) |
Historická
1.2.2015
Historická
1.3.2014
Historická
1.4.2015
Historická
1.4.2013
Historická
1.11.2013
Historická
1.11.2011
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 22.12.2024 (Počet položek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.