Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
Automaticky přeložený název:
Standardní zkušební metoda pro stresu-Koroze titanových slitin u leteckých motorů čisticími prostředky
NORMA vydána dne 1.11.2012
Označení normy: ASTM F945-12
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2012
Kód zboží: NS-57020
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
controlled temperature conditions, engine cleaners, maximum operating concentration, metallographic inspection, prestressed titanium alloys, stress-corrosion cracking (SCC), ICS Number Code 49.025.30 (Titanium)
Significance and Use | ||||||||
3.1 Because of the tendency of prestressed titanium alloy parts to crack if heated while in contact with certain chemical reagents, it is necessary to ensure that cleaning and maintenance materials will not initiate stress corrosion of titanium alloys under controlled conditions. For test specimens, two common titanium alloys are selected, one that is very susceptible (AMS 4916) and one that is not very susceptible (AMS 4911) to stress corrosion cracking. |
||||||||
1. Scope | ||||||||
1.1 This test method establishes a test procedure for determining the propensity of aircraft turbine engine cleaning and maintenance materials for causing stress corrosion cracking of titanium alloy parts. 1.2 The evaluation is conducted on representative titanium alloys by determining the effect of contact with cleaning and maintenance materials on tendency of prestressed titanium alloys to crack when subsequently heated to elevated temperatures. 1.3 Test conditions are based upon manufacturer's maximum recommended operating solution concentration. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Specification for Methyl Ethyl
Ketone, Standard Specification for Nitration
Grade Toluene Standard Specification for Reagent
Water AMS 4916 Sheet, Strip, and Plate-8AL 1MO 1V,
Duplex Annealed |
NEPLATNÁ
1.12.1992
NEPLATNÁ
1.8.1994
NEPLATNÁ
1.2.1996
NEPLATNÁ
1.2.1996
NEPLATNÁ
1.12.1992
NEPLATNÁ
1.12.1992
Poskytování aktuálních informací o legislativních předpisech vyhlášených ve Sbírce zákonů od roku 1945.
Aktualizace 2x v měsíci !
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 23.12.2024 (Počet položek: 2 217 157)
© Copyright 2024 NORMSERVIS s.r.o.