Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
Automaticky přeložený název:
Standard Specification pro vícevrstvé poly (vinylchloridu) (PVC) Plastová trubka s porézní jádro
NORMA vydána dne 1.5.2010
Označení normy: ASTM F891-10
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2010
Kód zboží: NS-56842
Počet stran: 9
Přibližná hmotnost: 27 g (0.06 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
cellular core, coextruded, drain, waste, and vent, PVC, Schedule 40, thermoplastic, Cellular plastics, Coextruded poly(vinyl chloride)(PVC) pipe/tube--specifications, Conditioning--plastic pipe, Drain/waste/vent (DWV)--poly(vinyl chloride)(PVC), Land drainage piping systems, Nonpressure piping--specifications, Poly(vinyl chloride)(PVC) pipe--specifications, Schedule 40 pipe, Thermoplastic pipe/tube/fittings--specifications, Sewer pipe (thermoplastic)--specifications
1. Scope | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
1.1 This specification covers coextruded poly(vinyl chloride) (PVC) plastic pipe with a cellular core and concentric inner and outer solid layers, and is produced using a multilayer coextrusion die for nonpressure use in three series: an IPS Schedule 40 series; a PS series with an iron pipe size outside diameter with varying wall thickness as required for pipe stiffness of 25, 50, and 100; and a sewer and drain series. 1.2 The function of this specification is to provide standardization of product-technical data and serve as a purchasing guide. 1.3 The text of this specification references notes, footnotes, and appendixes which provide explanatory material. The notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. Note 1—All the pipe series covered by this specification are permitted to be perforated or belled for joining by solvent cement or belled for joining by an elastomeric seal (gasket). Because this pipe is OD controlled, the inside diameter will vary, and therefore, the pipe ID is not suitable for use as a socket. (For more information see Specification D2672.) Note 2—This standard specifies dimensional, performance and test requirements for plumbing and fluid handling applications, but does not address venting of combustion gases. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 The values stated in inch-pound units
are to be regarded as standard. The values given in parentheses are
mathematical conversions to SI units that are provided for
information only and are not considered standard. Note 3—Specifications related to this specification are as follows: D2665, D2729, D3034, F512, F758, and F789. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Historická
1.3.2012
Historická
1.2.2013
Historická
1.4.2010
Historická
1.12.2009
Historická
1.11.2013
Historická
1.11.2011
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.