Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specifications for Personal Climbing Equipment (Includes all amendments And changes 12/31/2010).
Automaticky přeložený název:
Standardní specifikace pro osobní horolezecké vybavení
NORMA vydána dne 1.11.2010
Označení normy: ASTM F887-10a
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2010
Kód zboží: NS-56824
Počet stran: 26
Přibližná hmotnost: 78 g (0.17 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
adjustable positioning lanyard, body belts, climber, climbing equipment, dee-rings, harnesses, keeper, lanyards, length adjusting device, locking snaphook, positioning strap, stirrup , shock absorbing lanyard, wood pole fall restriction device, Climbing equipment--specifications, Electrical insulating materials--specifications, Electrical protective equipment--specifications, Gaffs, Pole climbers, Protective equipment--specifications, Trees
1. Scope | ||||||||||||||
1.1 This standard covers the specifications and qualification testing of the following: Climbers, Climber straps, Climber Pads, Climber Footplates, Body Belts, Positioning Devices with Locking Snaphooks/Carabiners, Wood Pole Fall Restriction Devices (WPFRD), Harnesses, Shock Absorbing Lanyards. These devices are used by workers in the climbing of poles, trees, towers, and other structures. Minimum performance criteria for arc resistance of harnesses and shock absorbing lanyards are included for workers who may be exposed to thermal hazards of momentary electric arcs or flame. 1.2 Three types of climbers, Types A, B, and C, and two types of climber straps, Types A and B, are covered. 1.3 Two types of body belts, Types A and B, are covered. 1.4 Four types of positioning devices: three positioning straps, Types A, B, and C, and adjustable positioning lanyards are covered. 1.5 Two types of WPFRD, Types A and AB, are covered. 1.6 Two types of harnesses, Types A and B, are covered. 1.7 Two types of shock absorbing lanyards, Types A and B, are covered. 1.8 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.9 The following safety hazards caveat pertains only to the test method portions, 9.2, 10.3, 11.2, 14.4, 15.3, 15.4, 19.2, 22.2, 23, 24, and 25 of these specifications: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||
2. Referenced Documents | ||||||||||||||
|
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 24.07.2024 (Počet položek: 2 338 963)
© Copyright 2024 NORMSERVIS s.r.o.