Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Crosslinked Polyethylene (PEX) Tubing (Includes all amendments And changes 12/31/2010).
Automaticky přeložený název:
Standardní specifikace pro Zesítěný polyetylén ( PEX ) Tubing
NORMA vydána dne 1.12.2008
Označení normy: ASTM F876-08b
Poznámka: NEPLATNÁ
Datum vydání normy: 1.12.2008
Kód zboží: NS-56755
Počet stran: 11
Přibližná hmotnost: 33 g (0.07 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
crosslinked polyethylene, hydrostatic stress, PEX, PPI, pipe, pressure, tubing, Azo compound crosslinking, Crosslinked polyethylene (PEX) pipe/tube--specifications, Peroxide crosslinking, Polyethylene (PE) tube--specifications, Pressure testing--plastic pipe/tube, Silane compound crosslinking, Stabilizer migration resistance, Stress cracking tests, ICS Number Code 23.040.20 (Plastic pipes)
1. Scope | ||||||||||||||||||||||||||||||||||||||||||||
1.1 This specification covers crosslinked polyethylene (PEX) tubing that incorporates an optional polymeric inner, middle or outer layer and that is outside diameter controlled, made in nominal SDR9 tubing dimension ratios except were noted, and pressure rated for water at three temperatures (see Appendix X1). Included are requirements and test methods for material, workmanship, dimensions, burst pressure, hydrostatic sustained pressure, excessive temperature pressure, excessive temperature-pressure, environmental stress cracking, stabilizer functionality, bent-tube hydrostatic pressure, oxidative stability in potable chlorinated water, and degree of crosslinking. Requirements for tubing markings are also given. 1.2 The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The following safety hazards caveat pertains only to the test methods portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
||||||||||||||||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||||||||
|
Poslední aktualizace: 06.07.2025 (Počet položek: 2 207 474)
© Copyright 2025 NORMSERVIS s.r.o.